Originally Posted by tacxplosion
The only problem I see is that the wrath's ram is designed to work at lower pressure (100-120) PSI, whereas the legend works at the valve chamber's pressure. Considering the wrath's heavier ram and light back cap, I'd half expect it to shake itself apart in a few hundred cycles. If I were to do this, I'd shave the lower tube's face angle to a straight 90ş and fit an evil 2k2 timmy block on it (they're cheap and have a short shank) using the wrath's already existing LPR retainer hole (you'll have to use a 10-32 threaded screw though) and then run the LP hose to this solenoid:
inside the flat top frame of you choice. If money weren't an issue, I'd also shave a ton of extra metal the wrath has around the top tube and the corners on the lower tube.
The only gain to be had from this is a more comfortable frame (and a lighter marker if you do shave it).
Yea only reason I would try this is because I've been modding my wrath for years and it kinda just died years ago and I wanna get back into it.
If I were to do this I wanna avoid an LPR all together.
I will keep that in mind though, thanks for the info.
The wrath does run off a higher pressure with the upgraded ram I have, can't remember if it's delrin or teflon lol. That could benefit for the paintball shot distance.
I also have some heavier and lighter ram springs I could mess around with as well.