[stevie1013]

Background: The gun was chronoing at 280 last week, and working fine

Problem: There is a slight leak out of the barrel, and then when the trigger is pulled the gun fires full auto.

What i have tryed:

-replaced the battery
-replaced all outter bolt o-rings
-re lubed the entire gun

any ideas?

[Tcheno]

Chrono it once more and check your plunger O-ring

[stevie1013]

i cant chrono it, i cant get it to fire a ball per trigger pull, and replaced plunger o ring earlier

[Tcheno]

try raising your pressure a bit more.

[stevie1013]

is that clockwise or counterclock wise? assuming i am looking at the nut directly and the gun is below it?

[badmeat]

clockwise = slower
counter-clockwise = faster

the adjustment is the brass colored alan bolt at the bottom of the regulator

[stevie1013]

yea thank ^, i did a lot of work to the gun, its my freinds.

but then i had to leave to go back to my own house and im trying to give him instructions.

[stevie1013]

bump

[swanson11 (Banned)]

i could be the eyes try to clean them