Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Thread Tools
Old 11-15-2008, 04:58 PM #1
Join Date: Nov 2008
I just got a Marq 6 need help!!!!

I just picked up a Marq it is leaking from the back hole in the solenoid.
What do I do rebuild it or is the solenoid bad?
Marqed4death is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Old 11-15-2008, 10:05 PM #2
Dust white Darq Marq user
tokay444's Avatar
Join Date: May 2008
Location: Oakville ON. Canada.
take the noid off and first make sure it's not the manifold o-ring on the gun itself. otherwise, you'll be hard pressed to find o-rings for the noid shaft unless you call blast directly. they can be a bit tricky to re assemble. you need to pay very close attention to how it comes apart, so as to put everything back in the right place, especially the two tiny shafts. you'll know what i mean when you get in there. it is doable though. just work close to the table so if something does fall, it doesn't bounce away, and work over a paper towel or something white.
tokay444 is offline   Reply With Quote

Thread Tools

Posting Rules
Forum Jump