Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 10-21-2008, 11:58 AM #1
kamakazee killa
 
 
Join Date: Oct 2008
Pmr help!!! Eating too much air

I just installed a hater board...l7 bolt...and a cp on off...and
Every trigger pull eats about 500 psi...WTF... Help me out
kamakazee killa is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 10-21-2008, 12:29 PM #2
Mr. Furious
 
 
Join Date: Apr 2007
CP on/off is not the problem.

You need to take out the new bolt and put the original back in, get the board set to factory and make sure it's shooting OK. Then put the new bolt in and set the board up for that.

Or, to rule out the bolt as a cause you could leave the new bolt in and swap out the board for the original. If the air hog problem stops, the board is the problem and needs adjusted. If the air hog problem persists or gets worse then the bolt is the problem and you'll need to figure out what's wrong with it.
__________________
A skeleton walks into a bar and orders a beer and a mop.....
Mr. Furious is offline   Reply With Quote
Old 10-21-2008, 12:50 PM #3
kevinpb
 
 
kevinpb's Avatar
 
Join Date: Sep 2008
Location: Abq, NM
it might be dwell, try turning it down.
kevinpb is offline   Reply With Quote
Old 10-21-2008, 01:41 PM #4
infernaltrowa
Got swag?
 
infernaltrowa's Avatar
 
Join Date: Sep 2006
infernaltrowa plays in the USPL
infernaltrowa plays in the PSP
infernaltrowa owns a Planet Eclipse Ego
infernaltrowa supports Team VICIOUS
are there any leaks from the gun?
infernaltrowa is offline   Reply With Quote
Old 10-21-2008, 02:53 PM #5
kamakazee killa
 
 
Join Date: Oct 2008
I don't hear any leaks. But there has to be...I changed out all orings and it's still messing up...could a small leak cause it to eat air that severly?
kamakazee killa is offline   Reply With Quote
Old 10-21-2008, 02:56 PM #6
kamakazee killa
 
 
Join Date: Oct 2008
the dwell as well as all my board settings are set to default so do I need to turn it down with my new bolt???
kamakazee killa is offline   Reply With Quote
Old 10-21-2008, 08:53 PM #7
Protoballer89
Taylor Gang or Die
 
Protoballer89's Avatar
 
Join Date: Sep 2008
Yeah i think for tech t bolt there are certain settings (like dwell) that you need to have

Correct me if in wrong people
__________________
You gas up the marker, put on the mask, and walk onto the field. It doesn't matter that you failed a test, didn't get the girl, or got a ticket on the way there. This is your heaven on earth. Live it, love it, play it.

"Originally posted by _FreshPaint_: I love you and your sig."

"Originally posed by PbNation:This forum requires that you wait 30 seconds between searches. Please try again in 34 seconds."
Protoballer89 is offline   Reply With Quote
Old 10-21-2008, 09:02 PM #8
SynergyAMB1125
chuckin up the shakas
 
SynergyAMB1125's Avatar
 
Join Date: Jun 2007
Location: Maryland
Quote:
Originally Posted by Protoballer89 View Post
Yeah i think for tech t bolt there are certain settings (like dwell) that you need to have

Correct me if in wrong people
no i think you nailed it
__________________
Originally Posted by CANADARM: Asians with open coats flying down the black diamond hill with jeans on have almost killed me more times than I can count.
Originally Posted by OA_paintball: im just worried if i donate plasma and some cancer patient gets it, his dicks gonna grow and hes gonna have mad game with the nurses.. probably not good for the hospital.

Dennis Woolford 9/26/08

TROLLPOCALYPSERed-Shirted Super Smashed Bros '11
SynergyAMB1125 is offline   Reply With Quote
Old 10-22-2008, 07:58 AM #9
paintball sycho
Team Invictus
 
paintball sycho's Avatar
 
Join Date: Apr 2001
Location: dunkirk, NY
 has been a member for 10 years
if im not mistaken drop your dwell to 18 for the tech t bolt.
__________________


BioHazard, AA Armageddon

Discussion on anything autococking from sniper to MQ: www.CustomCockers.com
paintball sycho is offline   Reply With Quote
Old 10-22-2008, 08:25 PM #10
Genesis 4:7
 
 
Join Date: Oct 2008
18 is stock just to inform you btw much lower than that can give u major blot stick
__________________
I GOT A PM6 !

Need a team? PM me
Genesis 4:7 is offline   Reply With Quote
Old 10-22-2008, 08:29 PM #11
Protoballer89
Taylor Gang or Die
 
Protoballer89's Avatar
 
Join Date: Sep 2008
Quote:
Originally Posted by SynergyAMB1125 View Post
no i think you nailed it
yes!
__________________
You gas up the marker, put on the mask, and walk onto the field. It doesn't matter that you failed a test, didn't get the girl, or got a ticket on the way there. This is your heaven on earth. Live it, love it, play it.

"Originally posted by _FreshPaint_: I love you and your sig."

"Originally posed by PbNation:This forum requires that you wait 30 seconds between searches. Please try again in 34 seconds."
Protoballer89 is offline   Reply With Quote
Old 10-23-2008, 12:30 PM #12
pbkid22
we ball hard
 
pbkid22's Avatar
 
Join Date: Jan 2005
Location: Flo Rida
i thought 25 was the stock dwell?? correct me if im wrong idk.
pbkid22 is offline   Reply With Quote
Old 10-23-2008, 12:50 PM #13
erayser
AlternativePB.com
 
erayser's Avatar
 
Join Date: Sep 2005
Location: San Diego
Annual Supporting Member
erayser is a Moderator
erayser is a Supporting Member
erayser is BST Legit
Quote:
Originally Posted by pbkid22 View Post
i thought 25 was the stock dwell?? correct me if im wrong idk.
Yes, you are correct on the stock PMR bolt. It might be different for the L7 Techt bolt, which is the bolt in question.
erayser is offline   Reply With Quote
Old 10-23-2008, 11:35 PM #14
ClickClickBangBang
 
 
Join Date: Jan 2008
Location: NY, LONG ISLAND
the l7 is supposed to have a signifacantly lower dwell correct me if im wrong but i think it should fall between 13 and 18. and it might be a noid problem but that is the worst case senario. just take it to your local pro shop and maybe they can tell you what the problem.
ClickClickBangBang is offline   Reply With Quote
Old 10-24-2008, 04:01 PM #15
noobiusmaximus
 
 
noobiusmaximus's Avatar
 
Join Date: Feb 2006
Location: Illinois.
drop down the dwell for tech t bolt and also turn anti bolt stick off...
__________________
My PMR
You gas up the marker, put on the gloves, strap on the mask, and walk onto the field.. it suddenly doesn't matter that you failed a test, or that you didnt get the girl, your world is right for the next couple hours. This is your heaven on earth
..live it..love it..enjoy it..
noobiusmaximus is offline   Reply With Quote
Old 10-25-2008, 04:49 PM #16
Genesis 4:7
 
 
Join Date: Oct 2008
tech t bolt 18 im telling u
__________________
I GOT A PM6 !

Need a team? PM me
Genesis 4:7 is offline   Reply With Quote
Old 10-26-2008, 01:18 AM #17
michael.b.broussard
Paint magnet
 
michael.b.broussard's Avatar
 
Join Date: Oct 2008
Location: In a dumpster around the
common problem with pmr's. but hey what size tank r u using. because if ur tank is too small then u will think you have a gas hog. also check for leaks, replace o rings and lube. make shure that ur bolt is in properly because .0001s of an inch could cause a problem with air. also look into a barrel kit because that may help with ur air problem. also the solenoid in this gun isnt too great especially if you use it every weekend. but best thing to do is a tune up, check dwell, check paint to bore size and also chrono ur gun to where u normally use it at. remember factory dwell is set at 25. not sure what it is for the hater board
michael.b.broussard is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump