X-board vs. Turbo Board

alnen · 10-22-2001, 05:20 PM

What's the difference? I have an old, pre b.e. 12v revvy, so the delay is no problem for me. Which one would give me a faster feed?

HostileIntent · 10-22-2001, 06:55 PM

the turbo rev would. the x-board is made by BE to basicly just stop the delay. www.wickedairsports.com sells the turbo rev. which spins it much faster.

Terry2562 · 10-22-2001, 11:58 PM

Turbo rev all the way... be sure to tell them that you have a pre BE rev when you order.... They take a higher power for the eye.... Terry

sorisko · 10-25-2001, 03:25 PM

Quote:

www.wickedairsports.com sells the turbo rev. which spins it much faster.

Wicked Air Sports:

http://www.wickedairsportz.com/

p8ntballplaya2 · 10-25-2001, 07:54 PM

the x-board only gets the normal 13 bps, the turbo gets 16 bps. also the x helps the system from getting confused by the suinlight

Dark_recon · 10-26-2001, 12:43 PM

does the turbo board also help get rid of the delay as well as speed the feed rate up???

also dose it come with the chip only or dose the whole harness with battery contacts on it?

Dark_recon · 10-26-2001, 12:59 PM

ok the last questions dont need to be answered i found the answers to them

1:yes it does get rid of the delay
2:no it uses the clip type connections not pressure

but i have one problem....
i opened my revy last night and the plastic harness that holds the old chip in place is broke....
is this peice needed for the turbo chip or can it be scrapped?

thanks alot
Greg

Terry2562 · 10-26-2001, 01:02 PM

well it doesn't have a delay like what you're used to with the rev boards... Actually it approches the spinning paddle from a different perspective... It has some sort of logic on the board to adjust the paddle spin acording to the needed feed rate...or something like that..... anyway... it replaces the entire rev board as well as the battery clips... It uses battery connectors instead.... Terry

Terry2562 · 10-26-2001, 01:04 PM

well it does use the black plastic board holder to match the board to the rev shell.... Terry

Dark_recon · 10-26-2001, 01:24 PM

well do you know where i can get another harness at and how much they cost????

thanks again
Greg

SHaYDeE · 10-26-2001, 01:39 PM

www.dropzonepaintball.com has all the accessories you need for the revvy.

Dark_recon · 10-26-2001, 01:52 PM

shaydee:

i went to dropzones site before posting and i couldnt find it...

can u post a link to it???

thanks alot
Greg

SHaYDeE · 10-26-2001, 02:54 PM

if im not mistaken the "harness" is in the shell of the revvy. so i think you would have to buy another half.

http://www.dropzonepaintball.com/htm...evolution.html

i could be wrong.

Dark_recon · 10-26-2001, 08:44 PM

well i found the harness with another board (stock one) but i dont need the board all i need is the harness...
cause i got a new turbo chip so it would be usless to buy the new board just for the harness plus it would be 15 bucks for a little plastic piece if i went that way...
i emailed them to see if they sale just the harness

thanks
Greg