Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 09-21-2008, 07:13 PM #1
Khandra
Iss Go'n Rain!
 
Khandra's Avatar
 
Join Date: Jun 2006
Few borg questions- 06

Okay guys I know I've posted a few bulletins in here already trying to get some basic info, but now I'm looking to get a little more in depth with my cyborg.

What's the recommended/optimum pressure for an 06 cyborg? I have an adjustable output tank (Angel AIR, OG and you know it).

What's a recommended dwell? I know you're probably going to say stock, but give me a number please.

What other kind of oil can I put on the bolt? The guy shipped the gun to me but forgot to lube the bolt, and I'm wondering what to use in case I can't find any Tri-flow (stupid bike chain bull****).

LPR- So I know that in the sticky it says to put the gladiator at 200 psi using a gauge on the VRA w/ the lpr backed all the way out so that the gun does not cycle, then to turn it until the marker does completely cycle, and then turn it a little bit more. Is this all there is to it?

Exhaust assembly- I have an 06 style valve assembly which means I have the 3 pc cupseal, and I understand these see problems after a little bit. Should I worry about anything?

What kind of efficiency can I expect from a stock 06 borg?
__________________
AA

Clean Gloss black magno'd a1 f/s/t

Shocktech Burglarized

Right Attitude Paintball- It's all about the Right Attitude.
Khandra is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 09-21-2008, 07:20 PM #2
loki32687
Bankai
 
loki32687's Avatar
 
Join Date: Oct 2005
Location: Peabody, Ma
loki32687 is a Supporting Member
loki32687 helped look for balloons
loki32687 has achieved Level 1 in PbNation Pursuit
loki32687 has achieved Level 2 in PbNation Pursuit
Input pressure....Just make sure the HPR is set to 200 tune then move hpr to chrono and you will be all set

Dwell 10

I would get an 07 RED valve if you don't have one already. Expect about a case out of it. Give or take a pod or 2
__________________
Jerseys for sale. PM if interested. Some rare, some pro.

Has a can of bacon

My Feedback
loki32687 is offline   Reply With Quote
Old 09-21-2008, 07:40 PM #3
Khandra
Iss Go'n Rain!
 
Khandra's Avatar
 
Join Date: Jun 2006
What should I set the output on my tank to? Like 400 psi, 700 psi, what?
__________________
AA

Clean Gloss black magno'd a1 f/s/t

Shocktech Burglarized

Right Attitude Paintball- It's all about the Right Attitude.
Khandra is offline   Reply With Quote
Old 09-21-2008, 08:13 PM #4
blame it on god
Rotten to the core
 
blame it on god's Avatar
 
Join Date: Sep 2007
Location: Miami, FL.
blame it on god has achieved Level 1 in PbNation Pursuit
600psi is what myth regs are at. I have a max-flo micro on my 06.
__________________
MACDEV
blame it on god is offline   Reply With Quote
Old 09-21-2008, 08:24 PM #5
oldbastard
 
 
oldbastard's Avatar
 
Join Date: Jun 2007
Location: San Jose, CA
The Gladiator is a pretty decent reg and can take input pressures between 450-850psi without a problem. I have both LP and HP tanks and have never had an issue using either one on my Borg. Just as long as you set the HPR @ 200-220 psi, you'll be fine.
__________________
**2005 Sonic Borg**
2005 WDP G7 Red
2001 WDP C+C Red LCD
AGD Black Classic RT
AGD Minimag
Arrow Precision STP Sterling

Last edited by oldbastard : 09-21-2008 at 08:25 PM. Reason: typo
oldbastard is offline   Reply With Quote
Old 09-21-2008, 08:42 PM #6
Khandra
Iss Go'n Rain!
 
Khandra's Avatar
 
Join Date: Jun 2006
Oh okay. I thought they were supposed to receive high input, but I'll go with that. I usually set my tank to 500 psi for my old angel, so that should be okay for my cyborg as well. That's awesome news right there.
__________________
AA

Clean Gloss black magno'd a1 f/s/t

Shocktech Burglarized

Right Attitude Paintball- It's all about the Right Attitude.
Khandra is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump