Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 06-15-2008, 11:53 PM #1
Dustinkwon
~~~~IRONMEN FTW!!!!~~~~
 
Dustinkwon's Avatar
 
Join Date: Jul 2007
Location: 50 snake
Dustinkwon supports Team VICIOUS
Leaking through a piece RIGHT below the barrel on my diablo mongoose 2 lcd with eyes

its nots the reg the piece that sticks out right below the barrel..

put silicon tape on it (teflon tape i think its the same)

and lubed it and the o-ring seems like its in perfect condition..

i'm clueless wut to do??
__________________
LNIB PROPHECY with QUICKFEED FOR SALE ONLY (CHRISTMAS SPECIAL) ***PICS AND VID!!!!***
http://www.pbnation.com/showthread.p...7#post69493277

RARE HP CROSSFIRE 45/4500 HYDRO: 1/07 (PICS AND VID!!!!) CUMMM AND GETT ITTTT
http://www.pbnation.com/showthread.p...6#post69493816

UL'D PM7 FOR SALE ONLY! (ORANGE BOLT and CP SLING!) (PICS AND VID!!)(FULL SETUP F/S!)
http://www.pbnation.com/showthread.p...8#post69494548
Dustinkwon is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 06-23-2008, 03:07 PM #2
Dustinkwon
~~~~IRONMEN FTW!!!!~~~~
 
Dustinkwon's Avatar
 
Join Date: Jul 2007
Location: 50 snake
Dustinkwon supports Team VICIOUS
ANYONE? lol
__________________
LNIB PROPHECY with QUICKFEED FOR SALE ONLY (CHRISTMAS SPECIAL) ***PICS AND VID!!!!***
http://www.pbnation.com/showthread.p...7#post69493277

RARE HP CROSSFIRE 45/4500 HYDRO: 1/07 (PICS AND VID!!!!) CUMMM AND GETT ITTTT
http://www.pbnation.com/showthread.p...6#post69493816

UL'D PM7 FOR SALE ONLY! (ORANGE BOLT and CP SLING!) (PICS AND VID!!)(FULL SETUP F/S!)
http://www.pbnation.com/showthread.p...8#post69494548
Dustinkwon is offline   Reply With Quote
Old 06-24-2008, 10:21 PM #3
Dustinkwon
~~~~IRONMEN FTW!!!!~~~~
 
Dustinkwon's Avatar
 
Join Date: Jul 2007
Location: 50 snake
Dustinkwon supports Team VICIOUS
do u guys think i should get a new part?? because its like really scratched up and dented...but not like substantially...it shouldn't really affect performance but ya...i'm out of ideas lol


ANYONE CMON!??
__________________
LNIB PROPHECY with QUICKFEED FOR SALE ONLY (CHRISTMAS SPECIAL) ***PICS AND VID!!!!***
http://www.pbnation.com/showthread.p...7#post69493277

RARE HP CROSSFIRE 45/4500 HYDRO: 1/07 (PICS AND VID!!!!) CUMMM AND GETT ITTTT
http://www.pbnation.com/showthread.p...6#post69493816

UL'D PM7 FOR SALE ONLY! (ORANGE BOLT and CP SLING!) (PICS AND VID!!)(FULL SETUP F/S!)
http://www.pbnation.com/showthread.p...8#post69494548
Dustinkwon is offline   Reply With Quote
Old 06-24-2008, 10:55 PM #4
Fabregas04
 
 
Fabregas04's Avatar
 
Join Date: Feb 2008
Location: Charlotte, NC
Seems like the Wrath/Slayer/AR-1 gets more feedback around here. I, for one, know absolutely nothing about the mongooses...mongeese..whatever.

good luck though
__________________
FEP Quest - Olive/Black Dust - Lucky ACE board - CP Shorty Reg - CP Direct Mount On/Off - Empire Reloader B - 71/4500 Empire Fuel

QUEST is FOR SALE! Great Deal! Check it out.

Diablo AR-1, ACP Delrin Bolt+Pin, Evil Driver Barrel, Ricochet Apache, 48/3000
Fabregas04 is offline   Reply With Quote
Old 06-24-2008, 10:57 PM #5
Albert 93
 
 
Albert 93's Avatar
 
Join Date: May 2007
Location: FL
Albert 93 helped look for balloons
Albert 93 is playing at Living Legends III
Albert 93 owns a Planet Eclipse Geo
Albert 93 supports Team VICIOUS
Try the Kingman Forum, they would probably know more about it seeing as its a basically a spyder.
__________________
GEARBAG SALE!!! QUITTING!!!
Help pay for my speeding ticket buy my stuff.


"Originally posted by sixty nine: albert, your my hero."

"Originally posted by Paintballerbenny: My life achievements are defined by the approval of Albert 93"
Albert 93 is offline   Reply With Quote
Old 06-25-2008, 04:02 PM #6
Ostum
 
 
Ostum's Avatar
 
Join Date: Nov 2007
OK. I dont understand what u mean. Put tape on what? Lubed what?
Ostum is offline   Reply With Quote
Old 06-25-2008, 07:04 PM #7
zeev
 
 
zeev's Avatar
 
Join Date: Feb 2008
i think its your cup seal.
__________________
DIablo Mongoose II LCD
zeev is offline   Reply With Quote
Old 06-26-2008, 01:18 PM #8
uprock_101
 
 
uprock_101's Avatar
 
Join Date: May 2008
Does this happen when the Gun is cock or decock? If only when the gun is decock then that should be fine. Just make sure you cock the gun before you air up and there should be no more air leak. If it is Cock and you are still are getting air leak then it could be your cup seal.
uprock_101 is offline   Reply With Quote
Old 06-30-2008, 01:07 AM #9
Dustinkwon
~~~~IRONMEN FTW!!!!~~~~
 
Dustinkwon's Avatar
 
Join Date: Jul 2007
Location: 50 snake
Dustinkwon supports Team VICIOUS
Quote:
Originally Posted by Ostum View Post
OK. I dont understand what u mean. Put tape on what? Lubed what?

ok...here we go bro...ok have u ever seen a diablo mongoose 2 lcd with eyes??

ok anyways the part RIGHT BELOW THE BARREL...NOT THE REG....the piece that sticks out a couple if inches that part...

people said to lube it...i lubed it...and then they said the silicon tape (teflon tape i think its the same) i put it on...

IT STILL LEAKS....

if u don't understand me then ur dumb lol no offense...
__________________
LNIB PROPHECY with QUICKFEED FOR SALE ONLY (CHRISTMAS SPECIAL) ***PICS AND VID!!!!***
http://www.pbnation.com/showthread.p...7#post69493277

RARE HP CROSSFIRE 45/4500 HYDRO: 1/07 (PICS AND VID!!!!) CUMMM AND GETT ITTTT
http://www.pbnation.com/showthread.p...6#post69493816

UL'D PM7 FOR SALE ONLY! (ORANGE BOLT and CP SLING!) (PICS AND VID!!)(FULL SETUP F/S!)
http://www.pbnation.com/showthread.p...8#post69494548
Dustinkwon is offline   Reply With Quote
Old 06-30-2008, 01:08 AM #10
Dustinkwon
~~~~IRONMEN FTW!!!!~~~~
 
Dustinkwon's Avatar
 
Join Date: Jul 2007
Location: 50 snake
Dustinkwon supports Team VICIOUS
Quote:
Originally Posted by uprock_101 View Post
Does this happen when the Gun is cock or decock? If only when the gun is decock then that should be fine. Just make sure you cock the gun before you air up and there should be no more air leak. If it is Cock and you are still are getting air leak then it could be your cup seal.

both...but its just barel leaking out...how is it the cup seal?? but wutever how can i fix it?? like how much is a new cup seal?
__________________
LNIB PROPHECY with QUICKFEED FOR SALE ONLY (CHRISTMAS SPECIAL) ***PICS AND VID!!!!***
http://www.pbnation.com/showthread.p...7#post69493277

RARE HP CROSSFIRE 45/4500 HYDRO: 1/07 (PICS AND VID!!!!) CUMMM AND GETT ITTTT
http://www.pbnation.com/showthread.p...6#post69493816

UL'D PM7 FOR SALE ONLY! (ORANGE BOLT and CP SLING!) (PICS AND VID!!)(FULL SETUP F/S!)
http://www.pbnation.com/showthread.p...8#post69494548
Dustinkwon is offline   Reply With Quote
Old 06-30-2008, 02:23 PM #11
SA_4_LIFE
#EndProhibition2012
 
SA_4_LIFE's Avatar
 
Join Date: Dec 2006
Location: Minnesota
SA_4_LIFE has achieved Level 2 in PbNation Pursuit
Quote:
Originally Posted by Dustinkwon View Post
ok...here we go bro...ok have u ever seen a diablo mongoose 2 lcd with eyes??

ok anyways the part RIGHT BELOW THE BARREL...NOT THE REG....the piece that sticks out a couple if inches that part...

people said to lube it...i lubed it...and then they said the silicon tape (teflon tape i think its the same) i put it on...

IT STILL LEAKS....

if u don't understand me then ur dumb lol no offense...
Quote:
Originally Posted by Dustinkwon View Post
both...but its just barel leaking out...how is it the cup seal?? but wutever how can i fix it?? like how much is a new cup seal?
do you mean the front block/lpc, if its leaking out of the barrel, it means that the orings or the cupseal itself needs to be replaced
__________________
xbl: DeAdLY WrAtHZz

ST:A where station wagons are still racecars

Friends Don't Let Friends Drive Domestics
SA_4_LIFE is offline   Reply With Quote
Old 07-01-2008, 03:17 PM #12
uprock_101
 
 
uprock_101's Avatar
 
Join Date: May 2008
Okay, seems that you put teflon tape on the Orings on the Volumizer/LPC(number 26 in schematics). Take the teflon tape off replace the the O-rings, lube Oring, screw back in volumizer/ low pressure chamber. test. still leaks then checked the Oring on the Vertical ASA (number 33 in scematics) there should be two Orings replace Orings and test.

NOTE: When you take out Vertical adapter (33 in schematics) you should have access to the cup seal and front spring. checked the cup seal at that time.
Replace cup seal if needed.

As for how much a cup seal is. check the FAQ sheets and there is a link to the Diablo factory parts and price.
uprock_101 is offline   Reply With Quote
Old 07-01-2008, 06:23 PM #13
nelson920
nelson, dan nelson
 
nelson920's Avatar
 
Join Date: Jun 2008
Location: dead box
simple fix lock tight i did it works great. just use blue lock tight BLUE if u use that then u can take it off if u need to, but it still seals perfect. its great
nelson920 is offline   Reply With Quote
Old 07-01-2008, 11:33 PM #14
SA_4_LIFE
#EndProhibition2012
 
SA_4_LIFE's Avatar
 
Join Date: Dec 2006
Location: Minnesota
SA_4_LIFE has achieved Level 2 in PbNation Pursuit
Quote:
Originally Posted by nelson920 View Post
simple fix lock tight i did it works great. just use blue lock tight BLUE if u use that then u can take it off if u need to, but it still seals perfect. its great
it doesn't seal anything it just makes it so it doesn't move, air would stil get through, its either an oring or the cupseal
__________________
xbl: DeAdLY WrAtHZz

ST:A where station wagons are still racecars

Friends Don't Let Friends Drive Domestics
SA_4_LIFE is offline   Reply With Quote
Old 07-03-2008, 10:48 PM #15
Dustinkwon
~~~~IRONMEN FTW!!!!~~~~
 
Dustinkwon's Avatar
 
Join Date: Jul 2007
Location: 50 snake
Dustinkwon supports Team VICIOUS
Quote:
Originally Posted by SA_4_LIFE View Post
do you mean the front block/lpc, if its leaking out of the barrel, it means that the orings or the cupseal itself needs to be replaced
no i said NOT the barrel...i think its the lpc thingy that sticks out 2-3 inches...
__________________
LNIB PROPHECY with QUICKFEED FOR SALE ONLY (CHRISTMAS SPECIAL) ***PICS AND VID!!!!***
http://www.pbnation.com/showthread.p...7#post69493277

RARE HP CROSSFIRE 45/4500 HYDRO: 1/07 (PICS AND VID!!!!) CUMMM AND GETT ITTTT
http://www.pbnation.com/showthread.p...6#post69493816

UL'D PM7 FOR SALE ONLY! (ORANGE BOLT and CP SLING!) (PICS AND VID!!)(FULL SETUP F/S!)
http://www.pbnation.com/showthread.p...8#post69494548
Dustinkwon is offline   Reply With Quote
Old 07-03-2008, 10:50 PM #16
Dustinkwon
~~~~IRONMEN FTW!!!!~~~~
 
Dustinkwon's Avatar
 
Join Date: Jul 2007
Location: 50 snake
Dustinkwon supports Team VICIOUS
Quote:
Originally Posted by uprock_101 View Post
Okay, seems that you put teflon tape on the Orings on the Volumizer/LPC(number 26 in schematics). Take the teflon tape off replace the the O-rings, lube Oring, screw back in volumizer/ low pressure chamber. test. still leaks then checked the Oring on the Vertical ASA (number 33 in scematics) there should be two Orings replace Orings and test.

NOTE: When you take out Vertical adapter (33 in schematics) you should have access to the cup seal and front spring. checked the cup seal at that time.
Replace cup seal if needed.

As for how much a cup seal is. check the FAQ sheets and there is a link to the Diablo factory parts and price.
i don't think its the cupseal since the leak isnt really near it...but it might still be because...the o-ring on the lpc part is like perfectly fine...i only put the teflon tape because i thought it would fix it lol...but i guess not...i'll take it off...

but wut does the asa have to do with the leaking that happens in a totally different place?
__________________
LNIB PROPHECY with QUICKFEED FOR SALE ONLY (CHRISTMAS SPECIAL) ***PICS AND VID!!!!***
http://www.pbnation.com/showthread.p...7#post69493277

RARE HP CROSSFIRE 45/4500 HYDRO: 1/07 (PICS AND VID!!!!) CUMMM AND GETT ITTTT
http://www.pbnation.com/showthread.p...6#post69493816

UL'D PM7 FOR SALE ONLY! (ORANGE BOLT and CP SLING!) (PICS AND VID!!)(FULL SETUP F/S!)
http://www.pbnation.com/showthread.p...8#post69494548
Dustinkwon is offline   Reply With Quote
Old 07-03-2008, 10:51 PM #17
Dustinkwon
~~~~IRONMEN FTW!!!!~~~~
 
Dustinkwon's Avatar
 
Join Date: Jul 2007
Location: 50 snake
Dustinkwon supports Team VICIOUS
Quote:
Originally Posted by nelson920 View Post
simple fix lock tight i did it works great. just use blue lock tight BLUE if u use that then u can take it off if u need to, but it still seals perfect. its great
i don't need lock tight..i need something that stops the lpc part from leaking lol...
__________________
LNIB PROPHECY with QUICKFEED FOR SALE ONLY (CHRISTMAS SPECIAL) ***PICS AND VID!!!!***
http://www.pbnation.com/showthread.p...7#post69493277

RARE HP CROSSFIRE 45/4500 HYDRO: 1/07 (PICS AND VID!!!!) CUMMM AND GETT ITTTT
http://www.pbnation.com/showthread.p...6#post69493816

UL'D PM7 FOR SALE ONLY! (ORANGE BOLT and CP SLING!) (PICS AND VID!!)(FULL SETUP F/S!)
http://www.pbnation.com/showthread.p...8#post69494548
Dustinkwon is offline   Reply With Quote
Old 07-04-2008, 10:40 AM #18
SA_4_LIFE
#EndProhibition2012
 
SA_4_LIFE's Avatar
 
Join Date: Dec 2006
Location: Minnesota
SA_4_LIFE has achieved Level 2 in PbNation Pursuit
ok so its not leaking out of the barrel, its leaking out of the lpc/frontblock? if it is either of those 2 then, take off the frontblock thing and see if the orings are in good condition or if they need to be replaced, then make sure that the lpc oring are in cood shape also, put back on and see if it works, if that doesn't help it could be the one thing inside isn't sealing the air off properly
__________________
xbl: DeAdLY WrAtHZz

ST:A where station wagons are still racecars

Friends Don't Let Friends Drive Domestics
SA_4_LIFE is offline   Reply With Quote
Old 07-04-2008, 04:02 PM #19
Dustinkwon
~~~~IRONMEN FTW!!!!~~~~
 
Dustinkwon's Avatar
 
Join Date: Jul 2007
Location: 50 snake
Dustinkwon supports Team VICIOUS
ya i think its something inside thats not sealing the air of properly since everything is in GREAT condition...soo wut is that piece inside??

the cupseal?
__________________
LNIB PROPHECY with QUICKFEED FOR SALE ONLY (CHRISTMAS SPECIAL) ***PICS AND VID!!!!***
http://www.pbnation.com/showthread.p...7#post69493277

RARE HP CROSSFIRE 45/4500 HYDRO: 1/07 (PICS AND VID!!!!) CUMMM AND GETT ITTTT
http://www.pbnation.com/showthread.p...6#post69493816

UL'D PM7 FOR SALE ONLY! (ORANGE BOLT and CP SLING!) (PICS AND VID!!)(FULL SETUP F/S!)
http://www.pbnation.com/showthread.p...8#post69494548
Dustinkwon is offline   Reply With Quote
Old 07-11-2008, 08:43 AM #20
uprock_101
 
 
uprock_101's Avatar
 
Join Date: May 2008
Quote:
Originally Posted by Dustinkwon View Post
i don't think its the cupseal since the leak isnt really near it...but it might still be because...the o-ring on the lpc part is like perfectly fine...i only put the teflon tape because i thought it would fix it lol...but i guess not...i'll take it off...

but wut does the asa have to do with the leaking that happens in a totally different place?

Not the ASA, the Front Block but in the Schematics they use the term Vertical ASA or Vertical adapter. Something like that. I figure that would be easier for you if you did happen to go through the schematics.

Have you checked the O-rings on the Front Block(vertical Adapter) there should be two O-rings on there. Check those too.

Last edited by uprock_101 : 07-11-2008 at 08:54 AM.
uprock_101 is offline   Reply With Quote
Old 08-02-2008, 12:42 AM #21
Dustinkwon
~~~~IRONMEN FTW!!!!~~~~
 
Dustinkwon's Avatar
 
Join Date: Jul 2007
Location: 50 snake
Dustinkwon supports Team VICIOUS
u serious 2 o-rings?? wtf?? theres only one..and thats the part that gets screwed on...and that front block is only 1 piece...soo i don't kno how to go inside..-_-
__________________
LNIB PROPHECY with QUICKFEED FOR SALE ONLY (CHRISTMAS SPECIAL) ***PICS AND VID!!!!***
http://www.pbnation.com/showthread.p...7#post69493277

RARE HP CROSSFIRE 45/4500 HYDRO: 1/07 (PICS AND VID!!!!) CUMMM AND GETT ITTTT
http://www.pbnation.com/showthread.p...6#post69493816

UL'D PM7 FOR SALE ONLY! (ORANGE BOLT and CP SLING!) (PICS AND VID!!)(FULL SETUP F/S!)
http://www.pbnation.com/showthread.p...8#post69494548
Dustinkwon is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump