okay, MARQ PROBLEM
I have a marq rapper, brand new, i know it has the lpr set at 80 and the hpr set at ? maybe 250... why the hpr so high? because it doesn't shoot with enough force at 220.. or 200. But at 250 it still doesn't have force enough to shoot the paintballs out. It does shoot, but it shoots like about at 180 fps.
Dwell is set to 12 but i've tried shooting at 8 and 10 also, no change at all.
Please HELP! i'm getting kind of disappointed here with my marq...
LPR & HPR TESTER PROBLEM
my tester isn't working right either, I slide it in and when I air it up it leaks! with my marq I did get a o-ring kit which I used 4 o-rings to replace the old ones from the tester but it still leaks. I know its not my Marq because I actually used a friends tester and it worked fine. I need to say that the tester isn't lubbed because I dont have any dow55 or dow33.
Please help, What is the problem with my marq?
What is the problem with my Tester?
What can i use on the tester instead of Dow55 (where i live i cant get dow55, for a couple of monts now, im from south america)
Please Help... Brand new gun...just a week old
Antofagasta Stealers Paintball TeaM
Pure Energy 68/4500
so your lpr is at 150 wow ,first thing get it set to 75-80whats the hpr get it to a normal level,hpr can affect lpr ;example hpr 230 with a lpr of 75 ,hpr of lets say 380 would increase to a estimate of your 150 lpr
then clean and relube (when possible) every thing ,check to see if all 3 holes on the engine are lined up ,check your air passages in the gun ,reset the board to factory settings ,battery of course oil the bolt.post back with the results
Palm Beach Vipers
Palmbeachpaintball.com VAPOR VENDETTA
2012 D4X CFPS Series champions
1st Place round 1 CFPS D4 X-ball 2011
1st place round 6 cfps d4x palm beach
1st place round 5 cfps d4x palm beach
1st place round 4 cfps d4x Palm beach
1st place round 2 cfps d4x Palm beach