I can get the local store to do that so a double trigger frame/trigger will work? Like what I had in mind, I have all the tools avable to do this, and a professonal welder.
1st step) cut off the singel tirgger gaurd
2) weld to peices of alumiun to together formers a 90 degree, or bend it
3)remove the singel trigger
4) add the new double trigger(if you know a trigger that would work please post a link)
5)Weld the lenght of alunium to old trigger frame/grip frame
would this work with some carfullness??
4th overall PETS Young Gun.
I just got 2 LED's that need some TLC yesterday...been dying for an angel to mess around with and when I got the offer for 2 I jumped on it.
what I'm trying to find out is:
1 can you put a newer style battery in and LED? (Like the LCD batteries)I have 2 LCD chargers from an earlier deal but don't have one that will fit the LED plus I have at least one new battery for an LCD somewhere.
2 can yoy change the charging port to the newer stlye?I have a bad battery from an LCD that has the wiring and charging port still on it and I thought I'd use it if there wasn't a reason why I can't.
3 if I can't do either where (if anywhere) can I get a charger?(I tried the link above and got a 404 error)
4 does WDP still give any kind of support for these guns (service,parts,etc)?Like I said I'm a new angel owner (I've been a cocker guy from day one and know almost nothing about Angels except where to put paint and air and which end to point at the other guys...and I can almost use my boss' IR3 without help now)
thanks for the info and I'm sure I'll be a total thorn in everyones side with innane questions for a while...
earlier today i was shooting my led. My tank was pretty much empty, like 500psi and suddeny my gun just started leaking air. i thogh t that maybe this was just because of low pressure so i refilled my tank and it strated leaking again. it souns like the air is comig out of the breeach area. if someone knows what might be wrong or how it mght be fixed please let me know
check to make sure you bolt was back? i've had my get caught forward and it would leak massive amouts of air. just try and open your breech up. if it won't swing right open throw a battle swab down the barrel and push it back. check it out and let us know.
A4 Fly Rasta & '99 Eclipse LED / 45/45 Apoc 2k / 12" TI Boomer / 12v Reloader / Dye Low Rise / 12" AA big bore / 14" AA
no the bolt is back. after looking at it closer i found that the air is leaking out of the spot in the breach where that round hole is, (the exhaust valve i think its called), and this happens whenever i gas it up