Originally Posted by Paint iLy
Hey blindchicken i have seen a few of your post and it seem you know your stuff when its comes to epi's, the same prob happened in mine today is the dwell a sure fix?
Personally, I have not come across this problem, but I would check all my board settings first. If that didn't work, then I'd make sure that there's nothing preventing your bolt from moving forward such as a torn o ring that may be jamming it in place. Then check your microlines and banjos to make sure that there is nothing that filled them up (i.e. Dirt, lube, Etc.). The biggest fear is that the solenoid may be done. I'll look into a way of being able to test whether or not the solenoid is functioning. I believe it should be easily tested with a multimeter and checking to see what the reading of the current and resistance are. Good luck solving this mystery. If there's anything else I can do for you, feel free to post again or shoot me a pm.