[jeremyw]

Hi my name is Jeremy and i just bought a PT Extreme.
When i put in the little CO2 and fire the ball goes out and flies about 10 feet and drops!!!!
Does anyone now how i could fix it??????
and yes i have it assembled properly because i followed the instructions.
PLEASE HELP!!
thanks
JER

[sorisko]

A few factors here are:

Velocity too high
Velocity too low
Not enough air

Is your gun recocking after? Give me some more details so that I may help.

[jeremyw]

ya it recocks after each shot.
is there a little plate behind the velocity adjuster between it and the spring?????
if so thats why because there is nothing there on mine.
thanks jer

[sorisko]

Crap I had a whole thing typed up in here and it didnt go through..... ill try it again.....


I belive there is supposta be a round circular thing between the spring and VA (velocity adjuster) thats the way it is in spyders, and the Enforcer anyways....... look in the parts guide to see if there is anything...... ummm

A friend of mine had the same problem when he was on vacation with the Enforcer... he came back and had me look at it.... the only problem was that the 12 gram needed to be changed... he screwed it in.....heard it leaking and unscrewed it a little bit, and it was enough to make it fire 10 feet, and recock ..... but all I did was put in a new 12 gram and it fired like new..... have you done that yet?

[jeremyw]

ya i put in 6 12 grams CO2 cylinders and they all shot like ten feet and then dropped. So i called my buddy who has had 22 guns in 8 months and he said that i could get a 3 or 4 onze CO2 tank for 25 bucks. So i am going to put a steel hose in the constant air adapter. Ill let you no how that worked. I also took a small nut and ground off the points. I slipped that into the gun between the spring and the va. So if any of this helps i will let you no thanks a lot.
jer