[josh_did_what]

I emailed BLAST about a week ago about getting a replacement bolt head because the pillow fell off my pillow bolt, and I was just wondering when I would be getting a reply. I emailed them at techsupport@boblongdirect.com- is there a new email possibly? Because I emailed them a long time ago once there and got a pretty fast response. Thanks.

Also, balls wont feed into my breach because of what appears to be the bolt sticking out to far, so its blocking the opening from the feedneck. Do i just unscrew the screw on the backcap? Thats what someone told me, but it hasnt done anything.

[ilanstylz]

call them, you'll get an answer right away then im sure.........as far as the bolt you need to adjust the rear end of the engine if u look at it from behind u can see that there is a screw in there u can adjust with an allan wrench

[IgnoranceInABag]

^^^ QFT call blast they dont respond to e-mails anymore. they should send you a new pillow. and to fix the bolt problem, just loosen the bolt adjustment screw in the back

[josh_did_what]

Ok thanks. Ill call them as soon as I get a chance.

[MavBoii28]

yeah calling them = big +

[PeScaDo]

to fix the bolt being too far up problem, all you need to do is screw the back of the bolt (the part that connects to the QD ram) into the bolt

[IgnoranceInABag]

^^^ what are you talking about? you cannot screw anything onto the QD

[SKI008]

I think he might be referring to the little screw in the back cap that you can adjust the bolt with, but I don't think that would have anythign to do with the pillow anyway.

Yeah call BLAST, I emailed them probably a month ago about getting my board flashed and still haven't heard from them, after 2 weeks of waiting I called them and got the info I needed in 2 seconds.

[chi-town baller]

email joe at blast. I called them and they told me to email joe and i had my pillow and button pad in about a week.

Sorry i cant remember the email but I am sure someone has it.

[josh_did_what]

Originally Posted by chi-town baller

email joe at blast. I called them and they told me to email joe and i had my pillow and button pad in about a week.

Sorry i cant remember the email but I am sure someone has it.

Is it possible you have it saved in your old emails?

Also, i think the screw may be stripped to adjust the bolt .

[1stGenRex]

call Joe @ BLAST
925-625-7929

[dcbiii]

Easiest just to call in. Number is in the sticky, as well as any other info you should need.

[SmS "Oga"]

hey i had the same problem but the gun also wouldnt shot over 200fps so i called them and sent it in and they are working on it right now i geuss. the women i talked to told me even to write VICE on the box because they are newer and they will check them first