[jhfdewey]

The eyes are clean, and the was board says they are working. blinking green once per second. but i turn on my loader. and the pballs are in the breech. but the eyes wont pick it up?
help needed
thanks
eye power is on 20(default)
and eye mode is setting 2

[R_ion]

When paintball is in the breach does it do fast blinking green? it means its detecting a ball in the breach.
Try eye power 8-10
I got mine to 8 before it started to read it properly.

[jhfdewey]

it just still blinks green for one second.
im trying that eye power now.

[jhfdewey]

tried setting 8 and wont read.

[asdffdsaasdf]

put your eye power to 20 ... theres no reason not to

and just to clarify ... you put your finger in the breech and nothing ... correct?

take off your eye covers and check for pinched wires

then look inside your grip up towards the body and locate the eye harnesses .... check to make sure those are connected properly

[shootingdahfool79]

if your settings are too high on your hopper they might be shoving past the detents

[Greatest ION]

just before this goes on a wild goose chase...you are not in simulate mode are you...?