Heres another project I started working on (another mq pump what a surprise). After some late night milling and early morning soldering its running. I ran some air through it and seems to be working nicely. still wanna do something with the body milling.
AKA Raw Merlin Mini Body
AKA Lighting Bolt
MTX 11/16" MQ2
Dye PM5 UL Frame
Scenario Dreams Universal T-Board (UTB)
CCM 2K Mini Pump Kit
Custom Thread Adapter (9/16-24 to 3/4-20)-to install the pump kit on the merlin
Custom IVG - similar to a rex dialer to hold the mq in place
The UTB is installed with no cap and the dwell set to 4 ms. Its using the stock board trigger switch, on/off button and eye button, no membrane pad.