[General Cole]

Some pics of my Flex 8 and my homemade mirror lens-


The visor


The Lens


Lens and Visor


Left Side


Right Side


Both Sides


Flex 8 Body. Chemically recolored with black accents and cut down (the top).

What do you think? I've also gone over the sharpie with black from an airbrush. The reason I used sharpie, and in some places, visa marker was to see how it looked. The black is clean and goes through the venting. I am going to try and drill out the mouthguard area more and see if I can build in a fan and some lights so that the lens can always be seen through.

[dhbb05]

Thats not a flex 8........ and how'd you make that mirror lens?

[General Cole]

When I oppened it at christmas last year it said Flex 8. And for the mirror lens I used a thermal blanket cut to size and glued down around the edges.

[hatchetwarrior1246]

Not a flex 8 and not bad on the mirror job, not sure it's safe, what kind of glue?

[General Cole]

Just super glue, and what kind of mask is it then? The mirror holds up really well, the only problems I had were getting gogged in the same spot starts to pull the film off. If the film comes off it will still hold up, its a brand new lens under it.