Originally Posted by TheePsycho
Yeah Sorry I wanted to mid block the back and make it look kind of like a lasoya intimidator cut for the angle but I didn't know how that would of turned out and there isn't much on this body I can change from stock sadly.
Haven't even considered milling the front block to match. Haven't really looked at how much meat is on that thing at all. As for the frame haven't looked into that either, nothing really has caught my eye to use and probably since I'm already dropping so much into this gun I should consider making a custom frame but again no idea which one I would want, but a 90 degree angel frame comes to mind and would be nice or just to be different a y frame.
Yeah, I couldn't stand my frontblock being all square and the rest of the gun being round, so I did my best to take all the meat off it and round it. There was actually more dremeling involved than milling since it needed a lot of free hand curves and such. It's as close to matching my body as it can get with out leaking. Here's some really horrible camera phone shots I took while I was doing it. It's still pretty rough in these pictures, but you can get a better look at the shape of it. It's funny how bad stuff looks before sanding and annodizing, and how good it looks afterwards.
As for the frame, the problem with a 90 is the way an eblade board is shaped. If you could get it in there... the screen would look all leaned forward because the top of the board where the cap is, angles back and won't let the board sit 90* from the body. It might work out fine it's just one problem I see.