I finally got around to building a stand. Pretty simple design, holds three markers and folds flat. Price ended up being about $10 bucks. I used 1" pvc, its a little sturdier than the smaller size pipes and holds together well without gluing.
Heres the build list.
(10) 1" T Fittings
(4) 1" Elbows
(1) 1" 12' pvc pipe.(I had some scraps laying around so you might need a little more or less depending on how many guns its going to hold. Its about $2.50 per pipe.)
(1) Length of Foam pipe insulation
(*) Tape to hold on the insulation
I used a hacksaw to cut all the sections but If you have access to a pipe cutter use it. Cutting will go much smoother and less mess. I still need to cut the barrel fittings. I really like the different things others incorporated into their stands like mask racks and pod stations but decided against it for mine. I really only need the stand to do one thing and thats hold my guns. I guess I could snazz it up with some paint....but its going to get thrown around anyway.
Edit; I updated the last pic with pipe length sizes in case anyone wanted to build a similar stand.
*Barrel risers/holder= 6"
*Runner = 22"
*back pieces= 3"
* 2" sections used to connect the front together.
Keep in mind that I used my gun to size this stand.
Hope this helps.