Originally Posted by thetrooper
I know a common question that comes up a lot is what setting do you recamend. These are the settings I found to work best. Keep in mind is will determine on your loader,switch,trigger set-up, and where your eyes where placed.
I use thes settings for my marker with lightened internals, 50 g T-Switch, Slasher Trigger, and a Halo B w/ Victory board.
Dwell - 4
Eye Delay - 0
Debounce - 5
I use these settings on the same marker when a Evolution II w/Z Board is on it.
Dwell - 5
Eye Delay - 10
Debounce - 6
For a typical stock set up and Revvy
Dwell - 6
Eye Delay - 15
Debounce - 8 (stock switch)
Debounce - 15 (50 gram switch)
The board will still count the Eye Delay if the eyes are bypassed or not installed so be sure to set it
I am just curious to what you all are doing with your VS/RS with a tadao M7, virtue, and verC t-boarded gats
Dwell- 3.5ms (appears to work, Will update after i play the day with it)
Eye or loader delay- 0