VS Series Info.

StiLL BaLLiN · 04-17-2008, 08:45 PM

question about vs3 bolt, when you take out the back screw on the bolt is there a spring and a small steel bb behind it?

sparky81 · 04-17-2008, 08:56 PM

Quote:

Originally Posted by StiLL BaLLiN

question about vs3 bolt, when you take out the back screw on the bolt is there a spring and a small steel bb behind it?

Sure is that's why your not supposed to take out the cocking knob although Kingman didn't put that in the manual

.

What you need to do is
1. take the allen screw out completely
2. put the cocking knob in with the grooves facing the rear of the bolt
3. put bearing (bb) in followed by the spring
4. then put allen screw back in to secure the cocking knob
5. adjust allen screw snug so the cocking knob will slide up and down in the grooves with slight force
6. put bolt back in gun and never pull cocking pin out again

StiLL BaLLiN · 04-17-2008, 09:00 PM

Thank you very much, I'm suprised I couldn't find any info on that. Is the cocking rod suppose to line up with the striker and sit on top of the bolt spring? It didn't seem wright but it did cock and work fine when we aired it up and tried it out, thanks again.

sparky81 · 04-17-2008, 09:04 PM

Yeah the cocking knob slides down into the striker, so make sure the hole in the striker is lined up.

StiLL BaLLiN · 04-17-2008, 09:07 PM

Ok got it, thanks sparky you wouldn't believe me if i told you how much trouble we've gone through trying to figure out where they fell out from, lol. Not only did they fall out they shot out when we fired it and spent an hour on the ground looking for those small pieces, anyway thanks bud we can still go ballin this weekend.

Slickrickdaruler · 05-22-2008, 08:57 PM

I know this is gonna sound stupid! But im a little confused ont he REG upgrade for the VS marker. Im more of a visual type of person. Not very familiar with the spyder guns but im trying to help my buddy upgrade his new vs2 to the best possible machine.

If we order the "Trinity" vs front block DO we NEED to upgrade the REGULATOR? Can we just replace stock one with a CP?

Do we NEED to install the trinity adapter ALSO or is that only if we want to use the Stock reg? Canwe use the stock reg with the front block and adapter?

When you speak about ASA you mean ASA /on/off under the grip? Why do WE NEED to change this? There is already an On/off on the gun!

Thanks for all the help i know we sound newbish but we are learning and trying to star far away from the "Expensive" pro shop

rellab07 · 05-22-2008, 09:15 PM

Quote:

Originally Posted by Slickrickdaruler

I know this is gonna sound stupid! But im a little confused ont he REG upgrade for the VS marker. Im more of a visual type of person. Not very familiar with the spyder guns but im trying to help my buddy upgrade his new vs2 to the best possible machine.

If we order the "Trinity" vs front block DO we NEED to upgrade the REGULATOR? Can we just replace stock one with a CP?yes you would have to replace it with a reg or a gas thru(only if you decide to keep the stock reg). Your cp red will work perfect

Do we NEED to install the trinity adapter ALSO or is that only if we want to use the Stock reg? Can we use the stock reg with the front block and adapter?no need for the adapter thats the whole point of the trinity frontblock

When you speak about ASA you mean ASA /on/off under the grip? Why do WE NEED to change this? There is already an On/off on the gun! well the stock on & off is the reg on the gun. so if you do decide to keep it it will restrict air flow.

Thanks for all the help i know we sound newbish but we are learning and trying to star far away from the "Expensive" pro shop

.

SigmundB · 06-08-2008, 11:32 PM

what is better a softer spring or a harder spring for my vs1

pilotacs1123 · 06-08-2008, 11:40 PM

it depends on what you want to achive.

SigmundB · 06-09-2008, 01:07 AM

what is the difrents on the springs like right know my gun cronos at 285 and the gun is maxed out

pingiel.pl · 06-09-2008, 10:37 PM

I jost got a VS3 and I am all ready having a problem with it. i have a rocking triger on it and when i shoot fast the bult goes back in to the gun so baseky when i go fast the bult gos back in can any one help

P.S. sorry for my English
Matt

rellab07 · 06-09-2008, 11:08 PM

did you not read what to do if it doenst re-cock?

pilotacs1123 · 06-09-2008, 11:53 PM

Quote:

Originally Posted by SigmundB

what is the difrents on the springs like right know my gun cronos at 285 and the gun is maxed out

lighter spring=higher dwell=higher fps
heavier spring-lower dwell=lower fps

SigmundB · 06-10-2008, 08:28 PM

that is cool thanks for the help

Teon54 · 08-23-2008, 04:43 PM

Ok I Have A Problem..i Just Got The Pulse Hopper And I Have A Spyder Vs2.. Can Someone Please Tell Me The Correct Way To Fit It Please.. Pm Me

sparky81 · 08-24-2008, 06:26 PM

Quote:

Originally Posted by Teon54

Ok I Have A Problem..i Just Got The Pulse Hopper And I Have A Spyder Vs2.. Can Someone Please Tell Me The Correct Way To Fit It Please.. Pm Me

http://videos.*************.org/sear...b60151eab0.htm

Read the sticky before posting.

Mazza · 11-14-2008, 01:10 AM

I've got a VS1.
Is it possible to fit the TRINITY VS FRONT BLOCK on it is it only for the VS2/3?

sparky81 · 11-14-2008, 03:21 PM

The Vs front block will fit the VS1

1NSANITY · 11-14-2008, 09:23 PM

god i forgot about this thread lol

beastboy79 · 12-31-2008, 06:06 PM

with lubing the striker pin it will cock back when i shoot it right because it does not do it know

Ishida · 01-01-2009, 08:49 AM

What about the New Designz Spyder LP Chambers ? Are they better than the Stock Spyder VS Chamber ?