[RobbieC]

Just bought a Shocktech NXT with Virtue Board. I turn the gun on and I am getting the "Flickering Blue" which is for no ball in breach, but when I try and fire it with Paint in the breach, it wont fire and still shows flickering blue. If I hold the trigger in it shoots, so I want to say that the eyes are working, but they won't allow the gun to fire when there is paint in the breach!

Any help would be appreciated.

[UR A DEAD MAN APPLES]

The eyes aren't working. Virtue has a forced shot, which is when the gun will fire if you hold the trigger for half a second.

[MagboySK]

Make sure the eye setting on the board is set to beambreak eyes and not reflective.

[RobbieC]

When the board is at beam break, the gun fires when I turn it on with no paint in the breach, and then the board caps at a low rof. I am thinking the eyes r bad.

[peachesarenottasty]

if the gun fire w/no paint in the breech, make sure you're eyes are properly plugged in and make sure it's actually set to break beam (i think it's yellow, and pull the trigger twice). If you don't have that option, you may need your board reflashed, you may also have a cap setting one the board you don't know about and that's what's capping it at low rof's. Also, you may want to clean your eyes if you haven't done so, you'd be amazed at the things I found in my NXT when I bought it from a friend.