Magna Loader RF chip

Deko · 12-22-2007, 05:44 PM

Is there a way to adapt the RF chip to the stock board, any instructions, info, picture illustrations, ect. This setup cant be all that too limited. Looking to purchase the RF chip if it will work on the EOS. With some soldering of course.

crpaint928 · 12-22-2007, 07:56 PM

no it wont sorry man

Deko · 12-23-2007, 10:15 AM

What is the reason for the RF chip not working in the EOS.

TheImPgoD · 12-23-2007, 10:49 AM

It doesn't have the transmitter/can't accept it. And I can almost gaurentee the board isn't written for a transmitter to even be possible on it.

URBANxFLOW · 12-23-2007, 03:47 PM

how about if you have a virtue... i also heard the rf is bad for the board

TheImPgoD · 12-23-2007, 03:58 PM

1. Maybe, depends on what Virtue does.
2. No.

Ydna · 12-24-2007, 06:40 PM

It'll work but you have to connect it properly. There isn't a drop-in install for it.
Info: http://www.zdspb.com/tech/misc/pulserf.html

Sean@smartpartswest · 12-26-2007, 09:30 AM

I have a pulse RF chip in my epiphany. So, I would assume it would work if it is similar.

Deko · 12-26-2007, 10:09 AM

Thats good to hear Sean! is there a schematic on how to do this with any RF Chip to the stock board?

Sean@smartpartswest · 12-26-2007, 10:14 AM

Quote:

Originally Posted by Deko

Thats good to hear Sean! is there a schematic on how to do this with any RF Chip to the stock board?

YDNA posted this from his website the post before mine.
http://www.zdspb.com/tech/misc/pulserf.html