[Genjibud]

Sorry for the huge pictures, but this MiniMag has a stock barrel, an Armson barrel, an Intelliframe with a blade trigger, Dye Sticky grips, and an ACI Sub-Zero gas through grip. The things that might depreciate the value are: the power feed thing was cut shorter, there's a hole drilled in the trigger guard for easier access to the screw, and it's not in THE best condition. It's got some scratches and such. Also, it's leaking from the power tube, but I believe it just needs a new o-ring. If I get that fixed, how much do you think this is worth?

[lax01]

rpg body
not sure on the rail
xvalve
pneum assist
dw fibur barrel

[gunangel]

100 for the top one

bottom one is worth 700 if you part it and find good buyers
600 if you sell it together, clean it up a bit and the price will go up.

[Orvis09]

There is a Mag on the wall a lot like this one at a local proshop:



It has a barrel that has a silver colored back that goes into a carbon fiber wrap around ceramic, dunno what kind other than it's ridiculously light. I don't know jack **** about Mags except that I've always wanted one.

[Chopper Duke]

I'd do $120 for the top one. Reverse valve and all

I'm with Gunangle on the next one.

Orvis, It's hard to say just on your description, but I would wager maybe $100.

[Orvis09]

It's definitely an older Mag, it's in great condition and I asked if it works and they just said "Beautifully." The barrel is like an old school Stiffi, except yellow on the inside. It isn't a smooth carbon wrap, you can feel the bumps and weaves in the carbon fiber wrap and the resin on it.

[italianstallion7]

how much would a power feed steel body emag run for, and how much for just the emag lowers and rail?

[Barjohner]

Ok this baby is about 12 years old and still works perfectly. how much think i can get for it.

minimag body,
16 glued SP AA barrel twist lock
agd blade trigger intelliframe ( holes for asa are drilled out one size bigger )
classic minimag valve
ghetto asa ( on/off )
ghetto foregrip

[SithSteve]

^ I'd say $110-$120ish

Hey lax... that's a 1st gen RPG Shadow rail (you can tell its the older style because the sear pin hole isn't flush with the rest of the rail).

[outreach]

micro mag 2000
ego frame
e2 board (uncapped as opposed to the egos 15)
wgp forgrip
tickler lpr
hybrid grips (have spd but the hybrids look better imo)
x valve (flawless)
lvlx
ult

[808_paintball]

-Chrome MM body, pump milled
-Classic rail, pump milled
-Jay's pump kit
-Classic valve, matching sn's, 1 star left
-L7 bolt
-32* expansion chamber (will have macro and fitting to on/off)
-Hardline to valve
-XSV rail
-System X on/off
-CCI bucket changer to run in VSC configuration (not pictured)
-CP .693 twistlock barrel
-Dye .689 twistlock barrell
-Python kit (twistlock to cocker adapter with sleeves)

[gunangel]

outreach i'd say it's worth 400-500 depending on how much you can get someone to pay for that body. most likely it will fetch 400 very easily

808 i'd say 300-400, once again 300 being pretty low especially with that barrel kit.

[Cyberkill04]

How about my mag here
http://www.pbnation.com/showthread.php?t=3114832

[apunkjunkie]

RT Pro Valve w/lvlX (how much do you think I could get for the valve/bolt?)
PTP Frame (how much do you think I could get for the frame?)

[pump_player23]

can someone give me a price on this please
only upgrades i know are the dye twist lock and the eclipse sight rail
thanks

[DJryan]

can anyone tell me what this is worth?








what it has:
lvl 10 bolt
XVALVE w/robtown army mod installed
12" dye boomstick (shown with freak barrel in photos not included)
Raven IT body
Eclipse classic Rail with Classic Splash anno
Eclispe Front grip with matching anno
Clamping (screw down) feed neck
RT trigger
Dye airport asa
intellie frame/ trigger
CP rail

thanks

[rsmag9]

Can I get an appraisal on this 68 Micromag? thanks

[thareal M.I.A.]

i have the 498th mag ever built.. it has been upgraded to lvl 7 by the factory way back in 95 maybe... the thing is bone stock except an original smart parts green barrel. i dont have pics but if i did they wouldnt tell you much that hasnt been said. so anyway if a collector was looking for some vintage magage what would you think this would garner?

[DarkNidan {MWB}]

AutoMag RT Classic,

Upgraded to the Lvl10. How much?

[maniacmechanic]

Originally Posted by thareal M.I.A.

i have the 498th mag ever built.. it has been upgraded to lvl 7 by the factory way back in 95 maybe... the thing is bone stock except an original smart parts green barrel. i dont have pics but if i did they wouldnt tell you much that hasnt been said. so anyway if a collector was looking for some vintage magage what would you think this would garner?

what makes you think this ? valve # ? , valve #'s have nothing to do with production time IIRC

[RobertSims]

I just picked this up and I know very little about it. So tell me a little about what I've got, and what its actually worth.

I wish it were actually anodized the way it is, but it was painted... Its a decent paint job but unfortunately paint is still paint. I would like to know its current value, and what it would be worth if I were to strip off all of the paint returning it to its stock color.