Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 12-02-2007, 04:34 PM #1
junglecat17
 
 
Join Date: Dec 2007
L7 Tech T Bolt Leaking, need help

I recently purchased a new tech T bolt for my PMR and have installed it exactly as shown on www.techtpaintball.com/raill7install.html
I am able to seal it when i first put in the bolt but when I fire the gun it starts leaking from the barrel. Has anyone experienced this problem in their guns, and if so how did you solve it? I have tried different O-rings but with no success.
junglecat17 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 12-02-2007, 05:34 PM #2
atwell3993
 
 
atwell3993's Avatar
 
Join Date: Jul 2007
Location: Maryland
Just put your stock bolt back in, you will see negligible improvement with aftermarket bolts, proto and dye's bolts are fine stock. Return it if you still can.
__________________
Feedback +6/0-

sponsors:
Route 40 Paintball
JT Paintball
Empire
atwell3993 is offline   Reply With Quote
Old 12-02-2007, 05:36 PM #3
PunkPbPlayer
Im a Squid [hkfc]
 
PunkPbPlayer's Avatar
 
Join Date: Sep 2004
Location: Vancouver/Gresham
PunkPbPlayer is a Supporting Member
just got mine. no problems. call them up.
hes really chill

atwell u dont kno wat ur talking about. our local team plays all with l7 bolts and they swear by ut,
PunkPbPlayer is offline   Reply With Quote
Old 12-02-2007, 07:39 PM #4
rjones1213
 
 
rjones1213's Avatar
 
Join Date: Nov 2005
Location: Saginaw, MI
rjones1213 is an NCPA player
rjones1213 plays in the APPA D5 division
rjones1213 has achieved Level 4 in PbNation Pursuit
i shoot my PMR with a TechT bolt in it no problems at all, sounds like you bolt is getting suck forward, clean the bolt really good then relube properly and use either dow 33 or slick honey, i asked a tech guy from techt and he suggested slick honey over dow 33 if you can get a hold of some
also make sure you dwell and input pressure is set right.
__________________
Old Feedback
I Do Cool Stuff

SVSU Paintball #14
rjones1213 is offline   Reply With Quote
Old 12-03-2007, 08:29 PM #5
junglecat17
 
 
Join Date: Dec 2007
Thanks for your help, but i have a a couple more Q's

what is the proper input pressure and dwell?
junglecat17 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump