Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
 
Thread Tools
Old 11-08-2007, 05:31 PM #1
joejoebob
*ninjabushy*
 
joejoebob's Avatar
 
Join Date: Dec 2005
Location: FL
joejoebob is a Supporting Member
ICD part-out + tank reg + pack

All items are in good condition, unless otherwise noted. It you want something parted, please let me know. I will not accept returns for items that have come as stated.
Happy offerings!


ProMaster HPR - (gloss black, used once) - SOLD for $5

-----------------------------------------------------------------------------

stock pull-pins (fits B2K, BKO and ProMaster; no pic yet) - just pay shipping

-----------------------------------------------------------------------------

solenoid (HEA10FA-GL-101W; clicks but probably does not function) - PENDING
manifold
gasket w/ oring seat

-----------------------------------------------------------------------------

ebay valve (new sealing surface; no pic yet) - SOLD in other thread (link at bottom)
derlin valve pin
Demented Products super-light spring (will part for $5.00) - SOLD in other thread (link at bottom)

-----------------------------------------------------------------------------

bolt - SOLD for $20.00 shipped
dyed red
o-ring mod by Demented Products
cut shorter

feedneck - just pay shipping

ram assembly (fits Bushmaster series and Defiant series) - $10.00 shipped
spring-less mod w/ bumper
devolumized by Demented Products
ported for high-flow by Demented Products



-----------------------------------------------------------------------------

LPR - SOLD for $3.00 shipped



-----------------------------------------------------------------------------

B2K4 body - just pay shipping
w/ detents (not pictured)



-----------------------------------------------------------------------------

feedneck - just pay shipping

stock valves x2 (one without orings) - just pay shipping
w/ valve pins



-----------------------------------------------------------------------------

B2K4 trigger frame - SOLD for $8 shipped
magnetic trigger
grips

Madpooh B2K/BKO blind harness (great condition; not "partable") - SOLD for $16.00 shipped
QD's
super-bright red LED
25g microswitch





-----------------------------------------------------------------------------

CCM no-rise - ICD threaded (this is LNIB) - SOLD for $20.00 shipped



-----------------------------------------------------------------------------

Empire Fast-Pack '07 (will wash it) - SOLD for $10.00 shipped
3+2
small/medium





-----------------------------------------------------------------------------

Pure Energy LP regulator - SOLD for $15.00 shipped




-----------------------------------------------------------------------------

CP direct-mount on/off ASA - SOLD for $30.00 shipped



-----------------------------------------------------------------------------

ProMaster stock board - SOLD for $10.00 shipped

-----------------------------------------------------------------------------

ProMaster stock ram - SOLD for $15.00 shipped
w/ barbs & QEV

-----------------------------------------------------------------------------

ProMaster stock gauge - SOLD for $5.00 shipped

-----------------------------------------------------------------------------

ProMaster LPR (black; like new) - SOLD for $10.00 shipped

-----------------------------------------------------------------------------

Thanks for looking!

-----------------------------------------------------------------------------

consolidated threads: http://www.pbnation.com/showthread.php?t=2436272 and http://www.pbnation.com/showthread.php?t=2438640 and http://www.pbnation.com/showthread.p...4#post41069034

items sold in other threads: http://www.pbnation.com/showthread.p...8#post45045678

Last edited by joejoebob : 04-01-2008 at 05:13 PM.
joejoebob is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 11-10-2007, 07:42 PM #2
tips_000
TIMMAH!
 
tips_000's Avatar
 
Join Date: Apr 2007
Location: nor mich (231)
i noticed u had a promaster too im making custom triggers for them and was wondering if u maybe wanted to trade tht bolt and maybe a lil money or maybe not pm me
tips_000 is offline  
Old 11-10-2007, 07:48 PM #3
joejoebob
*ninjabushy*
 
joejoebob's Avatar
 
Join Date: Dec 2005
Location: FL
joejoebob is a Supporting Member
PM'd.
joejoebob is offline  
Old 11-11-2007, 12:09 AM #4
Paintballer1193
 
 
Paintballer1193's Avatar
 
Join Date: Oct 2007
Location: FL
Would you be interested in parting out the CCM feedneck?
PM asap please.
__________________
ICD Promaster Black- Viewloader Vlocity Junior and Pure Energy 68 3000 fiber wrapped tank.
Redz Pepperstickz, CCM No- Pro ,Evil Detonator, Hybrid Skull Grips,CP Rail and Empire on off

I am Trading a O6 SFT Shocker... Way upped for a teamate. PM me if interested.

Last edited by Paintballer1193 : 11-11-2007 at 12:19 AM.
Paintballer1193 is offline  
Old 11-11-2007, 09:29 AM #5
Milano
 
 
Milano's Avatar
 
Join Date: Oct 2004
Location: 732, New Jersey
Yea, I would be interested in the CCM feedneck too if you would part. PM me a price.
Milano is offline  
Old 11-11-2007, 04:12 PM #6
joejoebob
*ninjabushy*
 
joejoebob's Avatar
 
Join Date: Dec 2005
Location: FL
joejoebob is a Supporting Member
Okay, here is the status of the feedneck. It is really really stuck. So I will have to do bad things to get it out, the threads are stripped anyway. Though, I can send it to CCM and get a replacement, which I will have them mail to the address of the new owner. It may just take a couple more days to get it to you. Will PM you both with price. First person to say yes gets it.

*edit: I have acquired another CCM feedneck in good condition and the threads work, it is ready to ship!*

Last edited by joejoebob : 01-06-2008 at 12:49 PM.
joejoebob is offline  
Old 11-25-2007, 01:09 PM #7
joejoebob
*ninjabushy*
 
joejoebob's Avatar
 
Join Date: Dec 2005
Location: FL
joejoebob is a Supporting Member
CP direct-mount on/off ASA sold to "L4sT_ReSOrT"!

Last edited by joejoebob : 01-06-2008 at 12:51 PM.
joejoebob is offline  
Old 11-27-2007, 06:22 PM #8
stupiddogg
I see bunkerd people.....
 
stupiddogg's Avatar
 
Join Date: Dec 2002
Location: Norcal
Annual Supporting Member
stupiddogg is a Supporting Member
 has been a member for 10 years
stupiddogg works for a Paintball manufacturer
the red bolt, stock promaster bolt? If it is, it should work with a LPM correct?
Mind doing some measurements? If it will work Ill take it


Thanks
SD
__________________
Derek Roberts
Owner/Developer FogDoc Products

stupiddogg is offline  
Old 11-27-2007, 07:09 PM #9
joejoebob
*ninjabushy*
 
joejoebob's Avatar
 
Join Date: Dec 2005
Location: FL
joejoebob is a Supporting Member
Quote:
Originally Posted by stupiddogg View Post
the red bolt, stock promaster bolt? If it is, it should work with a LPM correct?
Mind doing some measurements? If it will work Ill take it


Thanks
SD
It is a B2K bolt. B2K bolts work with regular ProMaster's, I am 99% sure they work w/ LPM's too.
joejoebob is offline  
Old 11-27-2007, 08:48 PM #10
joejoebob
*ninjabushy*
 
joejoebob's Avatar
 
Join Date: Dec 2005
Location: FL
joejoebob is a Supporting Member
Bolt sold to "SD"!

Last edited by joejoebob : 01-22-2008 at 07:31 PM.
joejoebob is offline  
Old 12-13-2007, 08:19 PM #11
[TimVanNormal]
I hate life.
 
[TimVanNormal]'s Avatar
 
Join Date: Feb 2007
Location: Rochester, NY
would the ccm neck fit a promaster?
Would you part it?
[TimVanNormal] is offline  
Old 12-14-2007, 05:38 AM #12
joejoebob
*ninjabushy*
 
joejoebob's Avatar
 
Join Date: Dec 2005
Location: FL
joejoebob is a Supporting Member
Quote:
Originally Posted by [TimVanNormal] View Post
would the ccm neck fit a promaster?
Would you part it?
Yes, it fits the ProMaster perfectly. I will part it. Currently, my other feedneck is at CCM to get replaced because I f'ed it up. So, you'd have to wait a couple of weeks while CCM replaces mine.
joejoebob is offline  
Old 12-14-2007, 11:28 PM #13
Litespeed
ytsejam
 
Litespeed's Avatar
 
Join Date: Oct 2005
Hey JoeJoe, PM pm me on the madpooh harness. If that is a blind madpooh harness, i'll take it if the price is right.

I have fixed a plethora of PDS harnesses over the years, but my next project I need a blind harness and I don't want to destroy any of my PDS harnesses.
Litespeed is offline  
Old 12-17-2007, 01:22 PM #14
tips_000
TIMMAH!
 
tips_000's Avatar
 
Join Date: Apr 2007
Location: nor mich (231)
something in gearsale for just the b2k4 trigger (not the whole frame) and the 2 pullpins??

PM ME!!!!!!!!!!!!!!!!!!!!!!!
tips_000 is offline  
Old 12-24-2007, 12:03 AM #15
poomunj
 
 
poomunj's Avatar
 
Join Date: May 2006
intrested in ram, pm me
poomunj is offline  
Old 12-24-2007, 12:56 PM #16
joejoebob
*ninjabushy*
 
joejoebob's Avatar
 
Join Date: Dec 2005
Location: FL
joejoebob is a Supporting Member
^^^ PM'd.
joejoebob is offline  
Old 01-02-2008, 02:04 PM #17
joejoebob
*ninjabushy*
 
joejoebob's Avatar
 
Join Date: Dec 2005
Location: FL
joejoebob is a Supporting Member
New parts added, have incorporated many threads.
joejoebob is offline  
Old 01-06-2008, 12:43 AM #18
mrbubbler
 
 
Join Date: May 2007
Location: socal
would that ram work on the first version of the bushmaster?
__________________
Custom Anno'd Gun Mob
What i shoot:

black~blue fade 07 quest.
mrbubbler is offline  
Old 01-06-2008, 12:35 PM #19
joejoebob
*ninjabushy*
 
joejoebob's Avatar
 
Join Date: Dec 2005
Location: FL
joejoebob is a Supporting Member
^^^ PM'd. Yes, it will fit!

I have another used CCM red no-rise for sale now.

Last edited by joejoebob : 01-06-2008 at 12:52 PM.
joejoebob is offline  
Old 01-22-2008, 07:32 PM #20
joejoebob
*ninjabushy*
 
joejoebob's Avatar
 
Join Date: Dec 2005
Location: FL
joejoebob is a Supporting Member
Madpooh B2K/BKO blind harness sold to "Litespeed".

CCM no-rise - ICD threaded sold to "ghostkiller".
joejoebob is offline  
Old 01-25-2008, 07:05 PM #21
Milano
 
 
Milano's Avatar
 
Join Date: Oct 2004
Location: 732, New Jersey
Hey, I would be interested in the solenoid, the lpr, and the ebay valve stem if you would be willing to part it...

Can you get pics of the solenoid?
Milano is offline  
 


Thread Tools

Posting Rules
Forum Jump