Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 08-19-2002, 06:34 PM #43
KlumpDud
 
 
Join Date: Jul 2002
Location: California
 has been a member for 10 years
Approx num of shots: 10 cases
Rof: 10.5 (default)
Settings: factory
Lpr pressure: 55 psi
Feed tube : low rise
Pinches per hopper: 1.5
Chops: 0
Breaks: 1
Loader: 12v revy w/ x-board and vortex impeller
Air system: 68/3000 crossfire "stub" (steel tank)
Consistency: +/- 3 fps
Efficiency: haven't determined
Prefered barrel: multiple
Any problems: once had a spike from 286 to 300 that cost us semi's
Comments: I love my Excal but I would love to see a new bolt that

A) Doesn't have any O-rings (like the viking's), and
B) Is 1/4" shorter in the rear so that it's flush with the body when back. If you feel the same way as I, check this thread out: http://www.pbnation.com/showthread.p...hreadid=123334
KlumpDud is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 09-22-2002, 10:37 PM #44
HomerPepsi
 
 
Join Date: Jun 2001
HomerPepsi is a Supporting Member
 has been a member for 10 years
Excal num : 619
Style: black unmilled - dbl tigger
Date recieved : 05/15/02
Approx num of shots: 20 cases
Rof: 10
Settings: dunno, never got a disk or cable
Lpr pressure: 60 psi
Feed tube : high and low, high preffered
Pinches per hopper: 3
Chops: never
Breaks: 4
Loader: turbo rev
Air system: pmi 68 / 4500
Consistency: +/- 5 fps
Efficiency: aprx. 2000 shots on a 68 / 4500
Prefered barrel: lapco
Any problems: nope
Comments: love the gun
HomerPepsi is offline   Reply With Quote
Old 12-07-2002, 09:54 PM #45
ballerboy
 
 
Join Date: Jun 2002
Location: HOT PHOENIX, ARIZONA
 has been a member for 10 years
serial num: 137

style: Blue Acidwash

recieved: 7 OF 2003

shot count: DON'T KNOW

rof: 12.65

LPR pressure: 70

settings: 12.65 settings?

feed tube: low rise

pinches per hopper: none, only when battery was low

chops: 0
breaks: 0
loader: Halo, upgrading to Halo B

air system: 90/4500 nitro-duck tuff skin
consistency: +/- 7

efficiency: 2100 if empty tank

preferred barrel: 12" SS lapco bigshot
ballerboy is offline   Reply With Quote
Old 12-09-2002, 08:53 PM #46
DukeBarry
 
 
Join Date: May 2002
Location: New England
 has been a member for 10 years
Re: Official Excalibur Database

[quote]Originally posted by Gecko
[b]everyone with an excal please reply in a similar manner please try and keep the post on topic. Would a mod please sticky this

Excal serial num :321
Style: full cut red blade triger
Date recieved : 9/02
Approx num of shots: 10 cases
Rof: origional
Lpr pressure: Orig
Setting Orig
Feed tube : Low rise
Pinches per hopper: 0
Chops: rare
Breaks: 3 a case
Loader: Halo B
Air system: 68 4500 pmi
Consistency: +- 4
Efficiency: @1000 per fill
Prefered barrel: Freak set 16"
Any problems: Reg is so touchy changing velocity is a pain
Comments: Love it dont want to tinker with it.
DukeBarry is offline   Reply With Quote
Old 02-03-2003, 06:35 PM #47
You know who
 
 
You know who's Avatar
 
Join Date: Oct 2002
Location: Tampa, FL
 has been a member for 10 years
Excal serial num : 359
Style: Black, Full Milled
Date recieved : 2-1-03
Approx num of shots: 10000
Rof: 22
Settings:?
Lpr pressure:whatever I turned it to
Feed tube : AKA low
Pinches per hopper: 2
Chops: 0 per case
Breaks: 1 per case
Loader: 12v Revvy
Air system: PE 68/4500
Consistency: +/- 2
Efficiency: case for 3000 fill
Prefered barrel: New style boomy
Any problems: when I traded my 2k freeflow for this it was broken..... amazing what a new battery can do.
Comments: Sooooo sweet!

You know who is offline   Reply With Quote
Old 02-24-2003, 02:49 PM #48
punisher0716
factory cert. aka tech.
 
Join Date: Jun 2002
Location: Rockford IL.
 has been a member for 10 years
Excal serial num : 043
Style: Black, unmilled
Date recieved : 2-14-02
Approx num of shots: 60000
Rof: 16
Settings:?
Lpr pressure:55
Feed tube : pressed on low
Pinches per hopper:
Chops: 0 per case
Breaks: 5 per case
Loader: 12v Revvy
Air system: m/f 68/4500
Consistency: +/- 2
Efficiency: 2300 per fill
Prefered barrel: freak system
Any problems: had old board so i couldn't shot long streams
Comments: looking for a aka cert. tech. in upper il. lower wi. boarder look no further.

Rockford Paintball Games and Supplies
7821 N 2nd st.
Machesney Park IL. 61115
(815) 282-2992

Factory cert. techs.
Nick Adams
Alec Lay

Not on aka's website yet. will be soon.
punisher0716 is offline   Reply With Quote
Old 06-25-2003, 01:46 PM #49
Scherm
 
 
Scherm's Avatar
 
Join Date: Jun 2003
Location: IL
 has been a member for 10 years
Excal serial num :EX#00017
Style:Factory Milled, Blue/Black Acid Wash
Double Trigger
Date recieved : Don't remember
Approx num of shots: Lost track
Rof: Factory (don't need anything higher)
Settings: Factory
Lpr pressure: Factory
Feed tube : High Rise Stock
Pinches per hopper:0
Chops:0
Breaks:0
Loader:Ricochet 2k
Air system:ACI Bulldog 45/4500
Consistency: Variance not worth
mentioning
Efficiency:Better than an Angel!
Prefered barrel:Freak System
Any problems:No problems worth
mentioning.
Comments:Best marker I have ever owned or shot!
Scherm is offline   Reply With Quote
Old 06-25-2003, 01:54 PM #50
Scherm
 
 
Scherm's Avatar
 
Join Date: Jun 2003
Location: IL
 has been a member for 10 years
Yes, I own 2 Excaliburs. Also have a Revenge V1 and a Black Widow Spyder

Excal serial num :EX#00026
Style:Black Ano, No Milling, Double Trigger
Date recieved :Sometime during first
production run.
Approx num of shots: Lost track
Rof:Factory
Settings:Factory
Lpr pressure:Factory
Feed tube :Low Rise
Pinches per hopper:0
Chops:A few when marker was new
Breaks:A few when marker was new
Loader:Ricochet 2K
Air system:ACI Bulldog 45/4500
Consistency:Excellent
Efficiency:Very Good
Prefered barrel:Freak System
Any problems:This was a first
production run Excal(it needed a lot of
fine tuning). But with feedback, AKA
took care of all the problems.
Comments:This marker has been a
workhorse for me, wouldn't trade it for
anything.
Scherm is offline   Reply With Quote
Old 07-11-2003, 11:52 PM #51
ScottQ
lefty scissors
 
ScottQ's Avatar
 
Join Date: Feb 2001
Location: Eureka Springs
Annual Supporting Member
ScottQ is a Moderator
ScottQ is a Supporting Member
ScottQ is a founding member
ScottQ works for a Paintball manufacturer
ScottQ plays in the PSP
ScottQ supports Team VICIOUS
Excal serial num :EX#168
Style:unmilled, single trigger
Date recieved : Don't remember
Approx num of shots: 2000, from me. who knows what the prev. owner did
Rof: no idea...slow.
Settings: Factory
Lpr pressure: whatever I put it at.
Feed tube : low rise
Pinches per hopper:0
Chops:1
Breaks:1
Loader:eggo 2
Air system: Dynaflow 68/45
Consistency: +10/-10
Efficiency:Better then my Rainmaker
Prefered barrel:Lapco Bigshot, Autospirit, or Microshot
Any problems: bad consistency, slow rof, leaked out the mac valves when i first got it.
Comments: It still is the second gun coming out of my pball bag. Rainmaker is still number 1.
__________________
Empire - Empire BT - JT Paintball - JT SplatMaster - Spyder

Let me close this conversation by saying that you are one unique individual.
ScottQ is offline   Reply With Quote
Old 08-25-2003, 07:58 PM #52
EvilPopTart
Moderator
 
EvilPopTart's Avatar
 
Join Date: Mar 2002
Location: South Carolina
Annual Supporting Member
EvilPopTart is a Moderator
EvilPopTart is a Supporting Member
 has been a member for 10 years
EvilPopTart is playing at Living Legends VII
EvilPopTart is Boss
Excal serial num : ex#00602
Style: unmilled Sapphire Blue
Date recieved : 08/03
Approx num of shots: 40k+
Rof: Unlimited with eyes, 10 cps in bypass/tournament lock
Settings: ----------
Lpr pressure: 72 pssi
Feed tube : CCM No rise
Pinches per hopper: 1-2 when walking
Chops: none
Breaks: 0 with my sceptor kit
Loader: Halo w/ T1 software and a ton of stickers
Air system: 68/45 Hyperflow tank
Consistency: +- 5 with good paint
Efficiency: 1800 or so off of a 68/45 Adjustable @ 280 fps, 1 instance where I got 2200 shots of a full 68/45 tank fill shooting Kicking paint through my javlin... that was insane.
Prefered barrel: Powerlyte Sceptor
Any problems: bad consistancy when I first got it and its kinda hard to walk it if it has a nelson board. you have to have a steady rythym.
Comments: shots smoother than my old one but the lack of consistancy when I first bought it was pissing me off. I sent it to an AKA master tech and it came back ready to kill people. Recently my nelson board died on me and I have had someone overnight me another one. Soon I will go to the WAS board with eyes and eye covers.

EDIT:

New Comments- Now the gun has been sent off to Auctionjunkie! for the Equalizer Board, Eyes, Eye milling, covers, TBM, ect. It rips.

Last edited by EvilPopTart : 04-11-2004 at 05:06 PM.
EvilPopTart is offline   Reply With Quote
Old 08-26-2003, 11:06 PM #53
ReakFuulz
 
 
ReakFuulz's Avatar
 
Join Date: Jul 2003
Location: Colorado
 has been a member for 10 years
Excal serial num : EX#794
Style: Red/Black Acid Wash
Date recieved : 07/31
Approx num of shots: 3000
Rof: 18.8
Settings: factory
Lpr pressure: factory
Feed tube : low rise
Pinches per hopper: 1
Chops:1
Breaks:1
Loader: Halo
Air system: Pure Energy 68,5000
Consistency: not sure, still tuning
Efficiency: ALOT O PODS!!!
Prefered barrel: Dye Ultralight
Any problems: need to adjust ball detent
Comments: Sicko Gun, new noids are sick, and getting the was board and eyes! + froth blade
__________________
----------------------------------
Dynamic NOMADZ!!!

2k2 Red Acid Wash Excal! PIMPzz
www.mcainternetsolutions.com/eric/excal2.wmv

Clan TWT - FLaVoR.WT
ReakFuulz is offline   Reply With Quote
Old 02-28-2004, 11:39 PM #54
montypup
Matrix Tech
 
montypup's Avatar
 
Join Date: Aug 2003
Location: Tulsa, Oklahoma
montypup is a Supporting Member
 has been a member for 10 years
Excal serial num : EX#794
Style: Red/Black Acid Wash
Date recieved : 01/15
Approx num of shots: 3800
Rof: 20+
Settings: WAS
Lpr pressure: 70
Feed tube : CCM Clamping
Pinches per hopper: 0
Chops:1
Breaks:2
Loader: Halo
Air system: Centerflag 201 88/4500
Consistency: +-2
Efficiency: Decent, still working on it
Prefered barrel: ANS s-5 kit
Any problems: None
Comments: Nuts Fast


I'm the new owner of this gun
__________________
Camo Splash Sonic Cyborg
White Reloader B
68/4500 LP Legion Air

Feedback
BUY MY STUFF!!!!!!
montypup is offline   Reply With Quote
Old 03-17-2004, 01:11 AM #55
pbeclipse
AKA Forever...
 
pbeclipse's Avatar
 
Join Date: Oct 2003
Location: So. Cal.
 has been a member for 10 years
Excal serial num : 152
Style: Full Milled Red Acid Wash
Date recieved : 03/04
Approx num of shots: A LOT
Feed tube : BP No Rider
Pinches per hopper: None so far
Chops: None so far
Breaks: None so far
Loader: Halo B with Rip Drive
Air system: 68/4500 Centerflag Hyperflow 420
Consistency: +- 5
Efficiency: No good test yet
Prefered barrel: 10in. CP 1 Piece
Any problems: Goes full auto when dry firing, trigger kind of sucks, but I have a blade on the way
Comments: I love this gun. Soon to come: Chaos board w/ eyes!

Randy
pbeclipse is offline   Reply With Quote
Old 03-26-2004, 02:07 PM #56
SanbornPride
AwaitingEmailConfirmation
 
SanbornPride's Avatar
 
Join Date: Aug 2003
Location: newhampshire
SanbornPride is a Supporting Member
 has been a member for 10 years
Excal serial num : 772
Style: Streamline
Date recieved : coule months ago
Approx num of shots: 4000
Rof: 16
Settings: rof16
Lpr pressure: ??
Feed tube : low rise
Pinches per hopper: usually 0
Chops:0
Breaks:5
Loader: Halo Zcoded
Air system: 68/45 Centerflag hyperflow
Consistency: depends entirely on paint
Efficiency: 2000+
Prefered barrel: javelin, ultralight
Any problems: BP no rise was too low and pinched after every shot
Comments: Best Gun ever!!! if you have the money get it, if you dont get a Viking.
SanbornPride is offline   Reply With Quote
Old 04-10-2004, 09:28 AM #57
theHigges
 
 
Join Date: Mar 2004
theHigges is a Supporting Member
 has been a member for 10 years
Excal serial num : #560
Style: Glossy Blue, '02 PBX Milling
Date recieved : 3-3-04
Approx num of shots: 2000
Rof: 20
Settings: n/a
Lpr pressure: 70psi
Feed tube : CCM Low-Rise
Pinches per hopper: 0
Chops: 0 per case
Breaks: 0 per case
Loader: Clear Halo B Z Code
Air system: CrossFire 68/3000
Consistency: n/a
Efficiency: n/a
Prefered barrel: Sceptor Kit, Dye 14" UL
Any problems: Messed around wiht it a little and some problem's ocurred, but not anymore.
Comments: One Word-SMOOTH.
__________________
NEW NAME: IMPROSUCKMYD
Private Message me on new name.
OLD TRUST
NEW TRUST
theHigges is offline   Reply With Quote
Old 05-10-2004, 05:49 PM #58
mlk3454
Weekend Warrior
 
mlk3454's Avatar
 
Join Date: Jul 2003
Location: NY
mlk3454 is a Supporting Member
 has been a member for 10 years
Excal num : 1527
Style: Bonebrake
Date recieved : 03/01/04 FSP
Approx num of shots: 30k
Rof: 17
Settings: dwell 10, deb 5, bip 0.1, bod 1, bcd 32, I think that is what I am currently running...if not it is something close!
Lpr pressure: 72 psi
Feed tube : Lapco clamping
Pinches per hopper: 0
Chops: none yet
Breaks: 10
Loader: Halo B with victory
Air system: Nitro Duck x-stream 68/4500
Consistency: +/- 4 fps
Efficiency: aprx. 1800 shots on a hot 68/4500
Prefered barrel: stiffi
Any problems: tad of fsdo at dwell 6 so I upped it to 8 and havn't noticed any yet...might update firmware
**edit 1.6 fixed the fsdo
Comments: This isn't as smooth as my 02 excal was but that will happen in time...I love excals!!!
*modded an evolve frame and it has a great feel
__________________
Ni Modo :)
OLD PBN feedback
All work and no play makes Jack a dull boy...

Last edited by mlk3454 : 09-08-2004 at 02:44 PM.
mlk3454 is offline   Reply With Quote
Old 08-03-2004, 04:28 PM #59
JGeil
AKA
 
Join Date: Mar 2003
Location: Cincy
 has been a member for 10 years
Excal serial num : 548
Style: 2003 Diamond Milled - Blue Acid Washed
Date recieved : 7/04 @ IAO
Approx num of shots: 1 case
Rof: "20bps/Unlimited" with eyes on, actual ROF at 14.7bps with setting below
Settings: (pandora) 8ms dwell/5ms delay/30ms min bolt open/25ms after shot delay
Lpr pressure: 72psi
Feed tube : stock
Pinches per hopper: 0 unless eyes were off
Chops: 2 or 3 while setting up board with eyes off
Breaks: 0
Loader: Halo B
Air system: 68/4500 Crossfire
Consistency: +/- 5
Efficiency: Will update when I get a chance to play a whole day with it
Prefered barrel: Hammerhead
Any problems: Nope
Comments: Great Marker, makes a great companion for my Viking
__________________
Black Half Milled Viking #517
Blue Acid Washed Edge Milled Excal #548

Last edited by JGeil : 10-16-2004 at 02:47 PM.
JGeil is offline   Reply With Quote
Old 10-01-2004, 05:57 PM #60
MAINIAC
"I Don't Know"
 
MAINIAC's Avatar
 
Join Date: Dec 2003
Location: Gahanna, Ohio
 has been a member for 10 years
Excal serial num : 639
Style: Black unmilled
Date recieved : 9/29/04
Approx num of shots: I Dont Know + 2000
Rof: Limited to loader
Settings: WAS 10/2/2
Lpr pressure: 60-65psi
Feed tube : CCM no-rise
Pinches per hopper: 0
Chops: 0
Breaks: 0
Loader: Halo B (non Z code)
Air system: 68/4500 PureEnergy on 2k5 CP on/off ASA
Consistency: +/-3
Efficiency: over 2000 shots on a 68/4500
Prefered barrel: Freak
Any problems: no, eyes are installed
Comments: shoots good
__________________
Limited edition gloss red
Featherlite Viking #869
Black Excalibur #639
AutoResponse ULE Mag

My Feedback
Answers are always hardest to find when the questions are unclear!!

Last edited by MAINIAC : 04-08-2006 at 09:30 PM.
MAINIAC is offline   Reply With Quote
Old 11-17-2004, 11:45 PM #61
Oc_rage (Banned)
 
Oc_rage's Avatar
 
Join Date: Aug 2003
Location: §ّ*اه£
Oc_rage is a Supporting Member
 has been a member for 10 years
Excal serial num : 213
Style: Green Acid wash
Date recieved : 6/?/04
Approx num of shots: 2 cases
Rof: 13
Lpr pressure: Unknown
Settings: ?
Feed tube : Stock Low rise
Pinches per hopper: 0
Chops: 1 (no eyes)
Breaks: 0
Loader: HALO B
Air system: 71-4500 Dye Throttle
Consistency: +- 5
Efficiency: 500 shots per 1000 PSI
Prefered barrel: Switch Kit
Any problems: had a bad board and eyes (my fault) aka was fast to help me fix it
Comments: Really good really fast
Oc_rage is offline   Reply With Quote
Old 01-09-2005, 06:40 PM #62
niq-toto
Haters welcome.
 
niq-toto's Avatar
 
Join Date: Sep 2003
Location: Fist Pump Nation
 has been a member for 10 years
Excal serial num : 235
Style: Purple/Black Acid wash
Date recieved : Feb. 2004
Approx num of shots: LOTS
Rof: 17?
Lpr pressure: Unknown
Settings: Pandora 2.something?
Feed tube : CCM No Rise
Pinches per hopper: 0-2
Chops: None
Breaks: A few in the barrel
Loader: Reloader B
Air system: 68/4500 Nitro Duck X-Stream
Consistency: +- 6 maybe (need to clean sidewinder)
Efficiency: 1800-1900 off a 68/4500 fill
Prefered barrel: Want a Switch kit, currently use a 4 piece empire kit
Any problems: A few electical problems because it was 2 years old, small consistency problems, no eyes for a while. (all these problems have been fixed)
Comments: Super smooth, not as fast as i would like but hey, i cant pull 20 in a game... d:
__________________
OT:A:MC - Stuntin' like my daddy.
'05 CBR 1000RR
'06 GSXR 600 - Sold
'09 Kawi 250R - Sold
niq-toto is offline   Reply With Quote
Old 04-29-2005, 06:16 PM #63
Murder-Hearts
Age of Sleaze
 
Murder-Hearts's Avatar
 
Join Date: Mar 2004
Location: 757
 has been a member for 10 years
Excal serial num : 521
Style: 03 Half mill with PBK front end
Date recieved : 4/27/05
Approx num of shots: a case and change
Rof: ~20
Lpr pressure: 68
Settings: custom, Pandora 2.2
Feed tube : Bp No-Rider
Pinches per hopper: 0
Chops: 0
Breaks: alot, bolt return delay too low, I'm still testing settings
Loader: Halo
Air system: 45/4500 LP Crossfire
Consistency: +/-3
Efficiency: a little over a grand
Prefered barrel: 12" Scepter
Any problems: see "breaks"
Comments: closed bolt is fun, but not more fun than Streamline Viking!
__________________

Last edited by Murder-Hearts : 05-07-2005 at 10:38 AM.
Murder-Hearts is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump