ITS DONE FINALLY
Hereís another project Iím trying to work on. I saw some post in the Voided Warranty about a single trigger E-frame. And some other posts about using eyes for auto trigger pump or putting it into a CCM frame. I figure squeeze a 9V into a CCM A/T frame with a Predator Mini Morrlock throw a MQ2 in the
body and you got a single trigger e frame AT pump. Iím trying to keep looking like a mechanical trigger as much as possible. It might take a while since Iím working on my other project (http://www.pbnation.com/showthread.php?t=2379389
) as well as some friendís guns. This gun was actually my first pump build.
Psychoballistics Superbolt Body (Halfd and Midgetd)
JCM Halfblock Sled, Bolt, Pin
WWA Premium Mini Pump Kit (Moded see other post)
Evil Detonator Reg (I donít like it and will it be changed)
Bob Long ASA
Transparent Red Powder Coat (Frame, Body and Tank to match)
Planet Eclipse E-Blade with E-2 Board
^soon to be CCM 86* Frame with AT
^with Predator Mini Morrlock Board
Finished the first step. Make the 9V fit. Came out alright. Its a squeeze. Gonna clean it up with a smaller cutter. Still uses the stock Hogue grips. Next step(s) mount board, switch, make a new sear (with adjustable trigger point).
I just finished this.
Its a "sleeper" the only thing that gives it away is the red ano of the MQ2 in the slot. The exterior of the frame has no extra holes or mods. The sear and trigger are unmodified, so the whole thing can be swapped back to a mech frame. got to do some tuning maybe a vid once i get more air.
sorry it took so long..........
heres a short video i didnt gauge the psi or chrono the speed yet. the dwell is 4 ms. the bolt is upside down to keep the volume down indoors. so basically this video is useless except to show the morlock running the mq and the A/T working.