I have it built and sitting in my lap as I type this, its my newly built and working osiris modded cocker with an 05 timmy frame.
it started out as a traded gun, it had an E1 on it, and a few ans parts, nothing special really, but it looked nice...(never took pics of it though
now its much different, I halfed it, added JCM parts, added an 05 timmy frame, modded my E1 board to use a micro switch and relocated a few parts, I made my osiris ram from very basic materials, once I take it apart again, I will post pics of my osiris ram, its a standard hammer with an extension on it for the ram to push the hammer into the valve, it works quite well. I used a stock WGP LPR on my ASA to power the osiris ram mod, and added a QEV to give it a much lower dwell time of 6, 5 works but its very inconsistant. sealed a few holes, and used a mini front block to make the frame take up the entire underside of the gun, moving the grip further forward, and its very balanced and comfy. Added QEV's to my ram, installed an eye, even though I really don't need it...routed the hoses into the grip frame, and into a noid I bought from ASP, one thats not even a paintball noid, but it fit my need.
I still have to upgrade the main reg baddly, and get a better LPR for the osiris ram, and this thing is good to go!
here are pics!
what do you think?