[teamdl]

ok i have a power feed mag level7 valve assembly and a booyaah these items might matter

ok when gassed up my bolt is too far forward so some of the balls don't feed all the time. someone told me the body was wore out so the spring could move forward more than usual

how can i fix this problem....?? not sure what bolt is in there i think it is the stock one or possibly a RT bolt

let me know asap!!

-Nathan-

[Seraphim]

Is it too far foreword all the time or just some of the time? try oiling it up first so you don't get bolt stick. Next I'd suggust buying a new body 'casue chrome and black teflon are pretty and you can get the 68' for like $120.

You might have a custom bolt that is too long as well. Make sure it is the STOCK mag bolt.

[Bingo]

before your buy a new body and hubla make sure it's not just that the bolt spring is not worn out not pushing the bolt all the way back. again it seems obvious but just trying to help. if it is worn out you can get one in a mag parts kit.

~Jason~