go to napa or a car product store and they should have carbon fiber pieces and the liquid **** u put on it to make it hold just read the directions and dont put it on urself lol i had a friend do that b4
Real carbon fiber is just a type of cloth that you use with fiberglassing resin to make stuff just like you would with fiberglass cloth. You don't really just put it on your gun or anything else. You need to make a mold and have the inside surface polished highly so the resin will come out shiney and then mold your carbon part in it and trim to fit and all the other stuff that you would do with a fiberglass part.
The fake carbon stick on stuff looks like it's fake from all the versions I've seen.
I just thought I'd take a quick peek and then the world went all yellow.....
I do not think it would stick to your marker alone, unless you took all internals out. Then put the different layers of fibers on with resin, take out all air and let it cure, depending in the resin you use, you may have to heat it up for it to cure, sometimes you can find resins that cure in the 300 F range, that is not hard to do.
But it will be hard to get to stick to your marker.