Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 02-06-2013, 11:52 AM #1
joshua.soper
 
 
Join Date: Apr 2010
Bob long d2 help

Ok. So I bought a d2 on eBay and it came in this week. I aired it up and had a leak from the solenoid. I called BLAST and troubleshot a bit on the gun. I turned the LPR to start and it was still blowing air out the solenoid and then I replaced solenoid and still same thing. What other probs might be happening to cause this? I noticed the velocity screw on the bottom of the reg just keeps turning when I try to adjust it to the minimal setting (tightening). Does this sound right? Shouldn't it righten to a stop eventually? PLEASE HELP!!

Also, on another note. What parts are compatible with this gun from other Timmy's? Such as bolt and board etc.
joshua.soper is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 02-06-2013, 05:38 PM #2
gamer565
*****es love cannons!
 
gamer565's Avatar
 
Join Date: Dec 2005
Location: OK
Annual Supporting Member
gamer565 is playing at Living Legends VI
gamer565 is playing at Living Legends VII
gamer565 posts videos on PbNation
gamer565 is reppin' sidebar 4 life
gamer565 has achieved Level 6 in PbNation Pursuit
gamer565 is one of the top 100 posters on PbNation
gamer565 is Boss
Make sure your not over pressuring the solenoid, and be sure to read the manual.
__________________
Jolly Green (╯□)╯︵ ┻━┻

gamer565 is online now   Reply With Quote
Old 02-07-2013, 07:32 AM #3
joshua.soper
 
 
Join Date: Apr 2010
How do I do that? I have read the Manuel and they just say call blast. Which hasn't helped all that much so far as they just want me to send it in and charge me. I have adjusted the LPR in every direction and no luck and adjusted velocity as well with no luck.
joshua.soper is offline   Reply With Quote
Old 02-07-2013, 07:25 PM #4
joshua.soper
 
 
Join Date: Apr 2010
Update. Buying reg thread adaptor nd bob long torpedo reg. going to rule out prob there. Still looking for input.
joshua.soper is offline   Reply With Quote
Old 02-07-2013, 07:33 PM #5
gamer565
*****es love cannons!
 
gamer565's Avatar
 
Join Date: Dec 2005
Location: OK
Annual Supporting Member
gamer565 is playing at Living Legends VI
gamer565 is playing at Living Legends VII
gamer565 posts videos on PbNation
gamer565 is reppin' sidebar 4 life
gamer565 has achieved Level 6 in PbNation Pursuit
gamer565 is one of the top 100 posters on PbNation
gamer565 is Boss
If adjusting the LPR to zero did not stop the leak, then the solenoid is not leaks as it gets it air from the LPR. Be sure to set the LPR to 75psi.
__________________
Jolly Green (╯□)╯︵ ┻━┻

gamer565 is online now   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump