[BlueImpulse]

Got the go ahead from Lamorte on this, so away we go!

I was browsing through the Autococker Database over on PBR, and thought it might be helpful to have an Impulse Database consisting of marker specs, setup, and performance info. Anyone needing advice could browse through and find a similar setup for use as a good starting point to tune their own, or just compare their setup with others.

A couple important notes:

****This thread is not a pic thread, that's what the Official Pic Thread is for. Links to pics are OK, any posts with physical pics will be deleted. Also, keep it strictly specification text only, no chatting, questions or comments. Thanks.

Instructions: Copy and paste the text below into your post and fill in your information. I know that not everyone will be able to complete everything on the list, so just do what you can. If you don't use an LPR setup just substitute what type of solenoid optimizer (if any) you use in it's place, e.g. Tapeworm, VFF, etc. If you would like and are able to do so, add your other board settings, any special tweaks to your setup, customizations, etc. in the "Comments" section. Thanks, Blue.

Originally Posted by VcityBaller_Impy

[...]You guys forgot trigger[...]

Added it to the master list. Previous posters: Please update your data if you get the opportunity

Body Type and Color:
Frame:
Trigger:
Board:
Bolt and pin:
Hammer:
Ram:
Ram Housing:
LPR:
Valve:
Ball Detents:
Feedneck:
Regulator:
Barrel:
Hopper:
Air Tank:

Internals Weight:
LPR Pressure:
Inline Pressure:
Dwell Setting:
Consistency:
Efficiency:

Comments:

[BlueImpulse]

Body Type and Color: Elia Custom UL Body, Blue/Black Acid Wash
Frame: v3 I Frame
Trigger: Modded CP DM4 Roller
Board: Morlock/ Reflective Eye
Bolt and pin: Modded NDZ Stubby Delrin Bolt, NDZ Ti Pin
Hammer: SS Rathole
Ram: NDZ SlikShot
Ram Housing: NDZ HE
LPR: Palmers Micro Rock
Valve: NDZ RIP
Ball Detents: NDZ
Feedneck: CCM Clamping
Regulator: CP Shorty LP
Barrel: 14" Freak
Hopper: NOXed VLocity Jr
Air Tank: Nitro Duck X-Stream 68/4500

Internals Weight: 984 gn
LPR Pressure: 100 psi
Inline Pressure: 165 psi
Dwell Setting: 9 ms
Consistency: ±4 fps
Efficiency: 1000-1200 shots from a 68/4500

Comments:

__________________

Body Type and Color: EPB Mouse, Dust Blue
Frame: Stock
Trigger: NDZ Blade, Magnetic return
Board: Blue Light Cricket
Bolt and pin: A+ Anodizing, Eclipse Pin
Hammer:NDZ Midweight
Ram: NDZ Slikshot
Ram Housing: SP
LPR: SP Mini Maxflo
Valve: Eclipse
Ball Detents: Eclipse/ EPB ?
Feedneck: Check-It SureFit
Regulator: WGP Ergo
Barrel: 12" Freak
Hopper: Empire Reloader
Air Tank: Nitro Duck X-Stream 68/4500

Internals Weight: ? gn
LPR Pressure: 80 psi
Inline Pressure: 165 psi
Dwell Setting: 5.5ms
Consistency: ±3 fps
Efficiency: 1200-1300 shots estimated from a 68/4500

Comments:

[Habit88]

Body Type and Color: Stock Black
Frame: Stock
Board:Stock
Bolt and pin: Ndz equalizer and Titanium Pin
Hammer: Ndz (not sure on weight)
Ram: n/a
Ram Housing:n/a
LPR: Jackhammer 2/ Ndz LPR combo (have both not sure which im gonna run)
Valve:Ndz Rip Valve
Ball Detents:Stock
Feedneck:Ndz Lo and High rise
Regulator: horizontal Max Fugly
Barrel: Freak/Progressive
Hopper: Halo B
Air Tank: Crossfire 68/45 (on the way)

Internals Weight:n/a
LPR Pressure:n/a
Inline Pressure: n/a
Dwell Setting:n/a
Consistency:n/a
Efficiency:n/a

comments: got mine the other day haven't tested yet on the count of i don't want to run co2

[rb211]

Body Type and Color: Toxic / Dark grey - light grey fade
Frame: Stock
Trigger: NDZ Pro-Mag
Board: WAS
Bolt and pin: NDZ Equalizer / NDZ Ti
Hammer: SS Rathole
Ram: Slickshot
Ram Housing: NDZ HE
LPR: NDZ / ANS Combo
Valve: NDZ RIP
Ball Detents: NDZ
Feedneck: Q-Lock
Regulator: Stock vert Maxflow
Barrel: Freak
Hopper: Reloader B
Air Tank: 88/4500

Internals Weight: 1106g
LPR Pressure: 60
Inline Pressure: 135
Dwell Setting: 7.5
Consistency: +/- 5
Efficiency: ?

Body Type and Color: Nasty - Blue/Orange fade
Frame: Stock
Trigger: NDZ Pro-Mag
Board: WAS
Bolt and pin: NDZ Equalizer / Ti pin
Hammer: NDZ SS Rathole
Ram: Slickshot
Ram Housing: NDZ HE
LPR: NDZ / ANS combo
Valve: NDZ RIP
Ball Detents: NDZ
Feedneck: Q-Lock
Regulator: Stock vert Maxflow
Barrel: Freak
Hopper: Reloader B
Air Tank: 88/4500

Internals Weight: 1106g
LPR Pressure: 60
Inline Pressure: 135
Dwell Setting: 7.5
Consistency:
Efficiency: ?

Body Type and Color: Rat LTD / Dust Silver
Frame: Stock
Trigger: NDZ Pro-Mag
Board: Scenario Dreams Universal T-Board w/ breakbeam eyes
Bolt and pin: FBM Mercury / NDZ Ti pin
Hammer: NDZ SS Midweight
Ram: Slickshot
Ram Housing: NDZ HE
LPR: NDZ / ANS combo
Valve: NDZ RIP
Ball Detents: NDZ
Feedneck: Q-Lock
Regulator: Stock vert Maxflow
Barrel: Freak
Hopper: Reloader B
Air Tank: 88/4500

Internals Weight: 1106g
LPR Pressure: 60
Inline Pressure: 135
Dwell Setting: 7.0
Consistency:
Efficiency: ?

Body Type and Color: Adrenalin - Dark blue / light blue fade
Frame: AIM
Trigger: AIM double
Board: Blackheart
Bolt and pin: FBM Mercury / Adrenalin pin
Hammer: NDZ SS
Ram: Slik Shot
Ram Housing: Stock Adrenalin
LPR: NDZ / ANS combo
Valve: RIP
Ball Detents: Adrenalin
Feedneck: Q-Lock
Regulator: CP Shorty
Barrel: Freak
Hopper: Reloader B
Air Tank: 88/4500

Internals Weight:
LPR Pressure: 80
Inline Pressure: 110
Dwell Setting: 7.5
Consistency:
Efficiency: ?

Comments: I'm still tweaking the pressure/dwell settings - I have no idea how many shots I get off of the 88, it's a lot though....

[Snowball13]

Body Type and Color: Cash Money from MikesPaintball. Silver with a little blue.
Frame: Stock 45*
Board: BlackHeart (hope to get WAS soon)
Bolt and pin: Shocktech supafly with ST lightweight pin
Hammer: SS Rathole
Ram: NDZ Slicshot
Ram Housing: NDZ
LPR: NDZ ultimate LPR combo with an AKA SCM switched with the JH2
Valve: NDZ RIP
Ball Detents: NDZ
Feedneck: Redz low-rise clamping
Regulator: Maxxy
Barrel: Freak with All American front-14"
Hopper: Halo B
Air Tank: Nitro Duck 68/4500, Crossy 48(I think)/3000-needs hydro

Internals Weight: ?No clue
LPR Pressure: ? 1/4 turn past lowest cycle pressure
Inline Pressure: 180
Dwell Setting: I think it's maybe 4 or 5
Consistency: Haven't gotten a chance to test with new products that I got
Efficiency: Haven't been able to shoot paint with it since I got new parts

Comments: Thanks Blue for making this. I'll update when I have the rest of my info.

[lamorte]

Body Type and Color: stock black w/custom jewels
Frame: stock w/black dye sticky's
Trigger: eclipse blade black with one hella trigger job
Board: vision blue light cricket w/ecs programming
Bolt and pin: ndz flush equalizer, ndz ti pin
Hammer: rat hole stainless
Ram: ndz slik-shot
Ram Housing: stock
Tapeworm: sp black
LPR: don't need one
Valve: ndz rip baby!
Ball Detents: stock
Feedneck: ccm locking
Regulator: horizontal max-flo
Barrel: main: 14" all american w/custom jewels.....spares: 14" j&j ceramic & 12" progressive
Hopper: smoke kingman lcd fasta & black evo-z board
Air Tank: (2)crossfire 68/4500's w/black dye rhino cover

Internals Weight: who cares?
LPR Pressure: don't need one
Inline Pressure: 150psi
Dwell Setting: 4.5ms
Consistency: dead nuts!
Efficiency: aprox 1400 shots from 68/4500

Comments: this is my plain looking seemingly underestimated meticulously cared for all black baby. when you look at her you say, "hmmmmm.....an impulse" when she roars, eyes get wide, heads turn, then try to duck for cover asap

[xdavekillyoux]

Body Type and Color: Stock Black
Frame: stock with CP roller trigger
Board: W.A.S
Bolt and pin: Strange Bolt, Ti Pin
Hammer: Brass
Ram: Slick Shot
Ram Housing: NDZ HE housing
LPR: Jackhammer II
Valve: RIP valve
Ball Detents: Hybrid
Feedneck: Check-it
Regulator:FEP zero drop, AKA2 Liter+
Barrelipe kit with stiffi tip
Hopper:Halo, Velocity JR
Air Tank:Crossfire 68/45 with Myth Regulator

Internals Weight: Brass hammer.
LPR Pressure: No clue
Inline Pressure: about 145
Dwell Setting: 7ms
Consistency: +/- 1-3
Efficiency: 8-10 pods and a hopper, 6 pods consistently


Comments: I need a new hammer, I had a evil SS hammer but it broke. so now it has a bit of kick but I still love my impulse.

[bubba69089]

Body Type and Color:Black Rat Jr.
Frame:otb frame
Board:WAS board
Bolt and pin: White NDZ cut short with a NDZ ti pin
Hammer: Aluminum rathole
Ram: NDZ slikshot
Ram Housing: NDZ HE housing
LPR: NDZ ultimate combo
Valve: RIP valve
Ball Detents: NDZ detents
Feedneck: NDZ clamping feedneck
Regulator: CP reg.
Barrel: Full freak kit
Hopper: tricked out halo
Air Tank: PE tank 68/45

Internals Weight: IDK
LPR Pressure: IDK
Inline Pressure: Around 110
Dwell Setting: 6ms or 7ms (will check)
Consistency: +- 1-3
Efficiency: around 9-10 pods usually

Body Type and Color: Red Python
Frame:HSW Iframe v2.5
Trigger: ^^
Board: Vision Crikit
Bolt and pin: NDZ stubby and shocktech pin
Hammer: NDZ SS midweight
Ram: NDZ slicshot
Ram Housing: stock
LPR: SP lpr
Valve:NDZ RIP
Ball Detents:NDZ
Feedneck: NDZ clamping (angel)
Regulator: CP
Barrel: J&J edge Kit (cocker)
Hopper: Halo B
Air Tank: 68/4500

Internals Weight: idk
LPR Pressure: TBD
Inline Pressure: TBD
Dwell Setting: TBD
Consistency: TBD
Efficiency: TBD

Comments: Also has CVS VA. with lpr and input gauges on it for easy reading

[agentdaffy007]

Body Type and Color: Golden Dragon
Frame: iFrame V3
Board: WAS Equalizer
Bolt and pin: NDZ White Stubby and NDZ Ti Pull Pin without top
Hammer: NDZ Aluminium Rathole
Ram: NDZ Slikshot
Ram Housing: NDZ HE Housing
LPR: SP LPR Kit
Valve: NDZ Rip Valve
Ball Detents: Kila SIX
Feedneck: CCM No-Pro
Regulator: Dye Hyper2
Barrel: Stiffi 14" .687
Hopper: VLocity Jr.
Air Tank: Crossfire 45/4500 LP

Internals Weight: ~900
LPR Pressure: 80
Inline Pressure: 160
Dwell Setting: 7
Consistency: +/-5
Efficiency: hopper + 5 pods

Comments: I'm working on better settings...

[VcityBaller_Impy (Banned)]

Body Type and Color:Stock 2003 Body with Purple Jewels, Black to green fade
Frame:Stock
Trigger:Eclipse Blade
Board:Blackheart
Bolt and pin:NDZ Equilizer,ST PIN
Hammer: stock
Ram: ndz slikshot
Ram Housing:stock
LPR:LPRs are just another thing to screw up...
Valve:WS Function
Ball Detents: One stock (long) and one chrome eclipse
Feedneck: ST clamping
Regulator: evil detonator
Barrel: Progressive
Hopper: Empire B
Air Tank: 47/3000, 850psi Imput

Internals Weight: dunno,havent checked
LPR Pressure:none
Inline Pressure:about 160
Dwell Setting:5.0ms, but isnt chronoed, could prolly lower it
Consistency:+/- 4 when set right..+/-12 right now cause it was just rebuilt and needs to be greased.really really bad.
Efficiency:About 600 off my 47/3000, but thats an estimate

Comments:Relatively nice, unique anno, shoots pretty good when set right, no FSDO. You guys forgot trigger, I listed mine.also,adrenalin GP slide check..also as for pressure,and dwell,both will be lower once i get my seal kit and valve (both shipped..)also,from what i can see and what i was told it was a shockwave canada pro gun.im pretty sure its in 300fps.not sure,if the green/black 2k3 in that is a stock body its mine.it might be a FF not sure (in 300fps)

[mrxr250rider]

Body Type and Color: milled black and raw
Frame: silver v2.5 iframe,milkman derlin scythe
Board: WAS
Bolt and pin: ndz eq stubby,derlin pin
Hammer: ndz super lite rathole
Ram: ndz slickshot
Ram Housing: ndz he
LPR: ndz
Valve: ndz rip
Ball Detents: ndz
Feedneck: ndz pro lock
Regulator: aka sidewinder
Barrel: freak with stiffi tip
Hopper: pulse
Air Tank: 68/3k crossy

Internals Weight: 900 grains? very light
LPR Pressure:
Inline Pressure: 150ish
Dwell Setting:6ms
Consistency:
Efficiency:

Comments:26bps goldwaved

[Illusion_nick]

Body Type and Color: Black Elia Milled Body
Frame: V.2 I-frame or OTB frame
Trigger: iframe - Custom delryn trigger / OTB - Stock
Board: WAS board and Eye
Bolt and pin: NDZ EQ bolt and NDZ TI bolt pin
Hammer: Evil Punch
Ram: Evil Punch
Ram Housing: Evil Punch
LPR: Tapeworm
Valve: NDZ RIP valve
Ball Detents: NDZ Detents
Feedneck: Trinity Clamping Neck
Regulator: AKA Sidewinder Short
Barrel: Freak back w/ AA tip
Hopper: Vlocity
Air Tank: 70 ci 4500 psi Crossy

Internals Weight: ???
LPR Pressure: N/A
Inline Pressure: 140
Dwell Setting: ? i forget ?
Consistency: +/- 7
Efficiency: about 750 paintballs from the steely

Comments: I Couldnt Be Happier!

[The_Lead_Factor]

Body Type and Color: Silver to Blue Freak Factory
Frame: Stock
Board: Criket w/ ECS
Bolt and pin: Strange w/ Freak Factory pin
Hammer: NDZ Mid weight
Ram: NDZ Slickshot
Ram Housing: NDZ w/ stock backcap
LPR: SP Tapework
Valve: Stock
Ball Detents: NDZ
Feedneck: CCM No-Rise
Regulator: Vert Maxxy
Barrel: Stainless Steel Freak(.693) w/ 14inch All American front
Hopper: Gangster'd Vlocity Jr.
Air Tank: 68/45 Max-Flo Micro & 92/45 Mac Dev Conquest

Comments: Sold before I had a chance to test the new internals

[Imp_MoFo]

RESERVED

[serafin_X]

Body Type and Color: Stock/Black with red parts
Frame: stock w/Red Dye grips
Trigger: CP Roller
Board: W.A.S
Bolt and pin: ST Supafly, Ti Pin
Hammer: Stock
Ram: Stock
Ram Housing: Stock
LPR: Jackhammer II
Valve: Stock
Ball Detents: Stock
Feedneck: some kinda clamp lock like a q-lock but not quite
Regulator: Vertical Max-Flow
Barrel: Ultralite
Hopper:Halo
ASA: CP mini-rail/CP on/off
Air Tank: Pure Energy 68/4500

Internals Weight: ??
LPR Pressure: whatever it gets set to at the chrono
Inline Pressure: 160ish
Dwell Setting: 6ms
Consistency: +/- a lot, it hasn't been fine tuned
Efficiency: haven't test since tapeworm/lpr. Was a Halo and 1.75 pods on a 48/3k.


Comments: Still some work I've got to do to it. I'm getting an I-frame, CP reg or Hyper 2, RIP valve, and tarantula black widow milling for it eventually. Maybe a 15* kick for the reg too. Right now is the first time since I owned her that she's 100%.

[TheImPgoD]

Body Type and color: Custom milled by Elia PB, dust black anno
Trigger: NDZ pro trigger, FBM delrin.
Board: WAS, of course.
Bolt and pin: Strange/Function, Rat
Hammer: Eclipse Titanium/NDZ mid weight
Ram: Slik shot/ Eclipse Titanium
Ram Housing: HE ram housing
LPR: SP
Valve: RIP valve
Ball Detents: NDZ/Eclipse fangz
Feedneck: Q-lock
Regulator: CP shorty
Barrel: Freak
Hopper: Halo B
Air Tank: PE 68/45

Internals Weight: I think it was 1100 last time I checked.
LPR Pressure: 100 some..
Inline Pressure: 140
Dwell Setting: 7
Consistency: +/- 5
Efficiency: Hell if I know

Adding my RAT

Body Type and Color: Older RAT
Frame: v3 iframe
Trigger: stock iframe (hopefully a FBM soon!)
Board: Morlock
Bolt and pin: NDZ Eq, my homemade delrin pin haha
Hammer: Eclipse Titanium
Ram: slickshot
Ram Housing: ndz
LPR: sp
Valve: rip
Ball Detents: ndz
Feedneck: qlock
Regulator: CP shorty
Barrel: Freak, of course.
Hopper: Halo...
Air Tank: 68/45 pe

Internals Weight: Around the same as the other imp
LPR Pressure: 110
Inline Pressure: 160
Dwell Setting: 5
Consistency: havent chronoed it yet, fool
Efficiency: ^

Comments: rips.

[PDXMark]

#1 [sig]
Milled stock black body
Iframe v2
Milkman prototype
WAS Equalizer v2.9
FBM Mercury bolt w/ rare Ti NDz pin
NDz Mid-weight SS
NDz Ti ram
NDz clear polished ram housing
NDz-ANS clear polished LPR combo II
NDz RIP
NDz clear polished non-vision
SP cam-lock
AKA Sidewinder (2nd gen)
To many barrels to list
Hybrid shell, B2 board, rip-drive halo guts
Tank: Crossfire/Luxfur - Tank reg: SP micromax

Internals Weight: ?
LPR Pressure: ?
Inline Pressure: ?
Dwell Setting: 7.8ms
Consistency: average +/-3fps
Efficiency: 7 pods and a hopper off a 68/4500[full]

Comments:

[The_Godfather3]

Body Type and Color: stock (Lamorte) black
Frame: stock w/ Hybrid grips
Trigger:silver eclipse blade trigger
Board: WAS
Bolt and pin: NDZ white custom 5" equalizer
Hammer: brass (yeah I know)
Ram:stock
Ram Housing:stock
LPR: don't need one
Valve:stock
Ball Detents: eclipse fangz
Feedneck: check no rise
Regulator: Hybrid Sparta attached to NDZ 15 deg asa
Barrel: dye 12" boomstick
Hopper: EvoIII
Air Tank: 68 stubby (heavy as ****)

Internals Weight: **** if I know
LPR Pressure: N/A
Inline Pressure: 150 psi
Dwell Setting: ???
Consistency: I wouldn't own it if it wasn't +/-2
Efficiency: gas hog (no LPR, RIP, or 4500.....what do you expect)

Comments:
Pretty much stock looks but I swear its more consistent than a Tippmann 98. I could probably invest in more ups but if it isn't broke then why fix it? It has never given me problems since the day I bought it and its fast. Not as fast as some of yalls (I'm from Texas) but fast enough.

[Chris Cole]

Body Type and Color: Stock/black
Frame: Stock
Trigger: Eclipse Blade (spring)
Board: WAS
Bolt and pin: Strange bolt/stock pin
Hammer: Eclipse Ti
Ram: Eclipse Ti
Ram Housing: Stock
LPR: Smart Parts
Valve: Stock
Ball Detents: Smart Parts
Feedneck: Check-it
Regulator: SFT Max-flo
Barrel: 14" Freak
Hopper: Halo B
Air Tank: 68/45 Centerflag or 68/3k ACI

Internals Weight:
LPR Pressure:
Inline Pressure: 200
Dwell Setting:
Consistency:
Efficiency: 9 pods and a Halo

Comments: will update with full info

[msonic]

Body Type and Color: Rat PB blue
Frame: Stock Rat
Trigger: NDZ wave
Board: WAS
Bolt and pin: Bandit shorty, NDZ titanium
Hammer: NDZ SS mid
Ram: NDZ slikshot
Ram Housing: NDZ HE
LPR: NDZ
Valve: NDZ RIP
Ball Detents: NDZ
Feedneck: NDZ norise
Regulator: CP shorty
Barrel: All American Freak
Hopper: RFd Pulse
Air Tank: 68/3000

Internals Weight:
LPR Pressure: 80-90psi
Inline Pressure: 120-130psi
Dwell Setting: 6.5
Consistency: +/- 4
Efficiency: 6pods and a hopper (68/3000)



Body Type and Color: Eclipse, Black to red
Frame: Iframev3
Trigger: DM4 CP
Board: WAS
Bolt and pin: Bandit shorty, NDZ Titanium
Hammer: SS Rathole
Ram: NDZ Slickshot
Ram Housing: NDZ HE
LPR: Function
Valve: NDZ RIP
Ball Detents: NDZ
Feedneck: CCM no rise
Regulator: AKA 2liter
Barrel: All American Freak
Hopper: Virtued Velocity
Air Tank: 68/3000

Internals Weight:
LPR Pressure: 80-90psi
Inline Pressure: 140psi
Dwell Setting: 6.5
Consistency: +/-3
Efficiency: yet to be determined

[xsn0man]

Body Type and Color: Gloss black, milled my self
Frame: IFrame
Trigger: Milkman
Board: WAS
Bolt and pin: Stubby Bandit bolt, SP Ti pin.
Hammer: Rathole SS
Ram: NDZ Slick Shot
Ram Housing: NDZ
LPR: Palmers Rock
Valve: RIP valve
Ball Detents: Hybrid
Feedneck: Q-lock
Regulator: Evil Detonator
Barrel: 14" Powerlyte Scepter
Hopper: Vlocity
Air Tank: Dye 68/4500

Internals Weight: 1040 grains
LPR Pressure: no gauge
Inline Pressure: 160 psi
Dwell Setting: 6ms
Consistency: pretty good +/- 2ish
Efficiency: 1000+

Comments: Efficiency is not where I want it, but its getting there.