[metal skitle]

ok im not exactly sure which forum this belongs in but whatever here goes:
i'm having trouble with my backup gun. It is a Viewloader Prodigy E-grip. The problem is this: when i pull the trigger, the ball either doesn't have enough force to make it out of the barrel or doesnt shoot past 4 feet if it has enough force to make it thru. I've taken the barrel off... same problem when shooting... no force behind the ball. Its not the CO2 cause I hooked that up to my 98c and it worked fine... put it back on the VL and its still having the problem. Its not the velocity either. I turned it ALL THE WAY UP and it still shot about 4 feet. Any ideas as to what the problem could be or how to fix it? Thanks!

[DyeMonic]

Take it to the marker specific forum.

[Jdiby17V2.0]

Lube it and do as stated above me.

[Mincus]

I had the same problem with one of my spyder clones, but I got it fixed at a shop. They just cleaned it and lubed it. If you know how to take it apart and put it back together, then make sure it is put together correctly and than clean it and lube it. You may have to do that several times. If you can't take it apart and put it back together correctley than just take it to a shop.

[morgan/sniper]

make sure the hole in the bolt is on the bottem, idk how that gun is setup but that is what was wrong with my friends triad

[Fubarius]

Yeah, check your bolt. Suprisingly easy to accidentially put it in upsidedown in those.

Also make sure your hammer bumper is BEHIND your hammer, and NOT IN FRONT of it.