New with Special Edition Evo - PbNation
Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Archived Thread - Cannot Edit  
Old 08-10-2007, 02:28 PM #1
tipprt's Avatar
Join Date: Dec 2005
 has been a member for 10 years
tipprt supports Shocker RSX
New with Special Edition Evo

What pressure should the gauge read if I am using the evel detenator. I have it currantly at 300 even and it runs great but just curious if it should be more or less. Also, kind of a noob question to the Evo. Does it really need the rear adjuster or can I control the velocity through the regulator?

Thanks in advance.
tipprt is offline  
Old Sponsored Links Remove Advertisement
Old 08-10-2007, 03:57 PM #2
ThatOneGuy?'s Avatar
Join Date: Aug 2007
you need the rear adjuster for velocity, and 300 is good. i think mines at 500psi, so i have to lower it a bit
ThatOneGuy? is offline  
Old 08-10-2007, 05:46 PM #3
Join Date: Jun 2006
Location: H2Otown, WI
 has been a member for 10 years
are you using co2 or N2
empiretippmann is offline  
Old 08-10-2007, 06:10 PM #4
Mr Virus
Mr Virus's Avatar
Join Date: Feb 2004
Location: The "Group W" bench
 has been a member for 10 years
300 psi is good...although you can lower it some if you wish.

Velocity adjustments can be done by regulator only, but you can also do spot changes with the thumb adjuster...just keep the adjuster at the mid range point.
Mr Virus is offline  
Old 08-10-2007, 09:38 PM #5
The Timebandit
TheTimebandit's Avatar
Join Date: Jul 2007
how do you measure psi? on the reg of the regular piranha evo???how do you tell how much psi your gun is set to??
TheTimebandit is offline  
Old 08-11-2007, 06:54 AM #6
yep, it's a piranha !
steveschmucker2005's Avatar
Join Date: May 2006
Location: Holland, MI
 has been a member for 10 years
the gauge on the side, when the tank (CO2/AIR/N2) is screwed in, will give you the psi of the gun. your velocity/fps (feet per second) of the paintballs are measured usually with a chrono. you can buy one or test out at a local pb shop or field.
steveschmucker2005 is offline  
Old 08-11-2007, 11:10 AM #7
SlavaROKZ (Banned)
Join Date: Jun 2007
Location: Las Vegas
wow 300. mine works on 200 somehow. it rococks and shoots at 285 +/-3.
I have the medium spring all the way in
SlavaROKZ is offline  
Old 08-12-2007, 03:24 PM #8
tipprt's Avatar
Join Date: Dec 2005
 has been a member for 10 years
tipprt supports Shocker RSX
With it set at 300 the marker shoots hard. I don't own a chrono anymore but I am guessing I am shooting hot. I am using N2. I think what I might do is fill my tank to 1000psi and gradually lower the regulator and see where it starts having problems recocking or having shootdown. Manual didn't really say much but I didn't know if it needed to be at a designated amount. Thanks again.
tipprt is offline  

Posting Rules
Forum Jump