need some cocker help - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 05-12-2001, 08:31 PM #1
LightEmUp
 
 
Join Date: Apr 2001
Location: ****cago Illinois
 has been a member for 10 years
what do i do when the cocking pressure goes wrong? the balls might as well just fall out the end of the barrel, and the velocity is set pretty high, was shooting at 280 all of a sudden i cant pop balls at point blank...little help pls
__________________
99 Cocker w/ Blue ANS Front block, Jack Hammer II, LAPCO Drop Forward, Dye chrome 45 Frame w/ clear sticky grips, Shocktech bolt, Black Ice reg., AKA tornado valve, 68 CI 3000 PSI Nitro duck
LightEmUp is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 05-12-2001, 08:37 PM #2
frog
Banned
 
frog's Avatar
 
Join Date: Apr 2001
Location: Atlanta, GA
 has been a member for 10 years
Try posting this in the cocker forum.
frog is offline  
Old 05-12-2001, 10:35 PM #3
Budha
Paint Slüt
 
Budha's Avatar
 
Join Date: Feb 2001
Location: Northern VA
 has been a member for 10 years
Either your paint is too small and it is rolling out of your barrel, or your bolt is upside down. Check both.
__________________
"What is this country coming to when the only people you can legally hate are white, conservative, Christian men?"

"Another innocent victim of APG...."

"I need a self esteem boost.... I think I'll go play walkon!"


Cocker World New to cockers? Want to learn about them? Click the link.
Budha is offline  
Old 05-13-2001, 12:28 AM #4
CockerMan86
 
 
Join Date: Apr 2001
Location: Naperville, Illinois
CockerMan86 is a founding member
 has been a member for 10 years
If the gun isn't firing at all, check and make sure your cocking rod is screwed in all of the way.
__________________
Just back into the sport after being out of it for five years....my how things have changed
CockerMan86 is offline  
Old 05-14-2001, 09:28 PM #5
sstruckguy
Administrator
 
sstruckguy's Avatar
 
Join Date: Feb 2001
Location: West Kentucky
Annual Supporting Member
sstruckguy is an Administrator
sstruckguy is a Supporting Member
sstruckguy is a founding member
 has been a member for 10 years
sstruckguy donated to help Peyton Trent
sstruckguy supports Sherwood Forest
Moving thread...

Gonna slide this over to the cocker forum..I hope you will
get your answer there.

Later,
sstruckguy is offline  
Old 10-19-2003, 06:21 AM #6
cuss74
 
 
Join Date: Oct 2003
Location: des moines
 has been a member for 10 years
here's one way to stop this from happening, get rid of it and buy a different gun
cuss74 is offline  
Old 10-19-2003, 11:52 AM #7
greenkill
Moderator
 
greenkill's Avatar
 
Join Date: Mar 2003
Location: nyc
greenkill is a Supporting Member
 has been a member for 10 years
i guess thats how you handle all your problems in life... i just give up and try the easier route.

the first thing you should do in this scenerio is start elimintating the possibility of what could be the problem...


You said that your pressure is dropping.. Do you have a gauge? Did you sweet spot your gun.. After firing, is the pressure recharged to the same psi each time? If so then its not the pressure, it is somewhere else on the gun..

Is your cocking rod screwed in tight? Check your timing to make sure everything is happening in sequence. Make sure you are cocking after each trigger pull.
__________________
S - Start of trigger pull
E - End of trigger pull
F - Firing Point
A - Actuating point

S------F--A------E
greenkill is offline  
Old 03-28-2005, 02:16 PM #8
wgpboy4life
paintcheck anyone?
 
wgpboy4life's Avatar
 
Join Date: Mar 2005
Location: La Mirada, California
the problem with cockers is they have many moving parts and many ways to adjust, sometimes the tickler is set too low and the back block doesnt want to work right and if you have an adjustable reg you might want to play with that but dont go too far out the reg will leak as i am typing my mini orracle is in pieces next to me. i have an e grip if you want to cut down issues on your cocker buy the worrblade comes with good delrin bolt also try you 3 way adjuster that might be set out of wack.
__________________
--FOR SALE!! a matte blue mini orracle with a worrblade with a few other upgrades :)
--And an 04 vtf cocker body with ccm pump kit :)
--hehehehe it just doesnt seem fair
accuracy and speed like never before join the army of worr
wgpboy4life is offline  
Old 03-28-2005, 02:21 PM #9
wgpboy4life
paintcheck anyone?
 
wgpboy4life's Avatar
 
Join Date: Mar 2005
Location: La Mirada, California
bolt upside down is a common error do a check to make sure the hammer is catching and releasing off the sear if it is not catching then it is the timming, to not extend the lug too far otherwise it will not fire, if you have messed with the timing start by backing the lug out then slowly turning in until the lug catches, then test the gun with some air even if it catches you should give it a half of a 1/4 turn to make sure it stays.
__________________
--FOR SALE!! a matte blue mini orracle with a worrblade with a few other upgrades :)
--And an 04 vtf cocker body with ccm pump kit :)
--hehehehe it just doesnt seem fair
accuracy and speed like never before join the army of worr
wgpboy4life is offline  
Old 03-28-2005, 02:26 PM #10
Earthsick
 
 
Join Date: Mar 2005
first, make sure that your LPR is set high enough to be fully cocking the gun, and make sure that at rest the gun is fully cocked.

unless your HPR has blown, it isn't the problem. leave it alone unless you've eliminated any other possibilities.

pull your trigger back slowly, the hammer should drop (and the ball fire) before your 3-way starts to hiss.

make sure your bolt isn't upside down.
Earthsick is offline  
Old 03-28-2005, 02:36 PM #11
St.louis Cocker guy
NEATO CAJEATO
 
St.louis Cocker guy's Avatar
 
Join Date: Mar 2005
Location: St.Louis, Missouri
It could be ur velocity adjuster.... You could either have it turned in too much wich could actually decrease ur velocity.. HAS HAPPEND TO ME BEFORE. You might want to check the orings that go around the velocity adjuster too.... GOOD LUCK...
St.louis Cocker guy is offline  
Old 03-28-2005, 03:25 PM #12
greenkill
Moderator
 
greenkill's Avatar
 
Join Date: Mar 2003
Location: nyc
greenkill is a Supporting Member
 has been a member for 10 years
You people should read timestamps. This thread is over 2 years old, and I'm sure by now the problem has been fixed.
__________________
S - Start of trigger pull
E - End of trigger pull
F - Firing Point
A - Actuating point

S------F--A------E
greenkill is offline  
Old 03-28-2005, 04:27 PM #13
St.louis Cocker guy
NEATO CAJEATO
 
St.louis Cocker guy's Avatar
 
Join Date: Mar 2005
Location: St.Louis, Missouri
didnt even pay attention to the time thingy.....
St.louis Cocker guy is offline  
Old 03-28-2005, 08:01 PM #14
Autococker91
Spiritus Sancti
 
Autococker91's Avatar
 
Join Date: Dec 2004
make sure that the hole in the bolt is DOWN.
__________________
XSV Fan Club Member #1262

For all of you who dont know where. Home of Deer Gore comes from
If Your parents didn't pay for your gear, put this in your sig.
Autococker91 is offline  
 




Posting Rules
Forum Jump