dm5 problem - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 08-04-2007, 07:39 PM #1
Walrus's Red Bucket
Touch me, i dare you.
 
Walrus's Red Bucket's Avatar
 
Join Date: Jul 2007
dm5 problem

Well i thought my dm5 had a blown noid, so i bought a brand new one, have all regs set at factory settings, and it is still leaking from the grip frame, changed the bolt sail and bolt o-rings and the leak is still there.
Any help/suggestions would be great
Walrus's Red Bucket is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 08-04-2007, 08:19 PM #2
suicidal stitch
 
 
suicidal stitch's Avatar
 
Join Date: Jul 2006
Location: SoMich
Did you lube the solenoid gasket before you put it in? All it needs a bit to make it look wet. Also make sure it's down nice and tight so it seals.


Sounds like it's probably the noid gasket, so start ruling that out, and if it still leaks let us know.
__________________

UL'd Black DM5
Pink/Black PM5

I want clear DM5 eye covers, PM me if you want black covers.
suicidal stitch is offline  
Old 08-05-2007, 08:31 AM #3
Choiboy
Mr. ****** \/
 
Choiboy's Avatar
 
Join Date: Jul 2007
Location: ---516---/Long Island,NY
well i fixed my leak right near the trigger frame (near the trigger) by just changing some of the o-rings on the bolt. Also remember than some o-rings are bad to start with so try replacing the ones u replaced.

EDIT: try this... The ones u should replace are the second two 8s and the one 2 in the the top left corner. Also lube it well.
__________________
Bob Long Ripper 3
Eclipse Ego7
WGP Trilogy Pump

Last edited by Choiboy : 08-05-2007 at 08:34 AM.
Choiboy is offline  
 




Posting Rules
Forum Jump