[fretmelter]

ok here is the site i love this site
http://www.goldmine-elec.com/

and i was wondering could i use any or these rams on my cocker?
http://www.goldmine-elec-products.co....asp?dept=1345

thnx

[IceMan89]

Wow.....I'm confused.... (a)Whats that site have to do with paintball and (b) where would you be using that air chamber thing on a cocker?

[DarkSide~Customz]

that site is sick!!..im going buy soo much stuff!..lol

[fretmelter]

i guess u have no idea what im tlking about...i think the cocker rams are too expensive and i want to know if i can use one of those?

[CyberThug]

cocker rams are ALOT smaller than those.

the smallest bore on those rams you posted was 3/4 of an inch. bigger around than a paintball.

[IceMan89]

Ahh I see.....my guess from the looks and what I remember when I had a cocker...is a no....but I very well may be wrong.

[Da_misfits (Banned)]

They Have Almost Everything, i was looking everywhere for surface mount LEDS and i found them here, along with several other things

[fretmelter]

yup i know tht place is the bomb and your welcome. any way where can i get cheap rams tht will fit a cocker doesnt have to be meant for one but one tht will fit?

[fretmelter]

how about these cuz they are small with the same stroke but i dont know if it is dual action like push and pull? http://www.clippard.com/store/displa...asp?sku=H9C-1D

[DaffyDubs]

http://www.goldmine-elec-products.co...?number=G13617

that only has a half inch bore and .75 inch stroke. that might work

[fretmelter]

do i need a inch stroke? i guess i can just add on. also do cocker rams operate at 15-20 psi or less?

[CyberThug]

more PSI.

and that clippard ram you posted costs 21.47, you can get a good used ram off the BST for that much.

[fretmelter]

so could i use the one from goldmine for like 3 bucks

[dr.strangelove]

Originally Posted by DaffyDubs

http://www.goldmine-elec-products.co...?number=G13617

that only has a half inch bore and .75 inch stroke. that might work

That's the only one of the ones posted that's been dual action (the others are spring-returned, so they'd be useless for a 'cocker), but it's still too big. The bore is a half inch and the threaded rod is a quarter inch - a wee too big to for an autococker's pump arm.

[fretmelter]

well i wasnt ganna use the stock pumo arm anyway
but without tht it would work correct?

[fretmelter]

i was going to make it so the ram was right next to the bolt and block so i didnt need a arm.

[dr.strangelove]

Theoretically, yes. It's 4" long and a half inch diameter though. I don't think you've got a real appreciation for how huge that is.

[CyberThug]

Originally Posted by fretmelter

so could i use the one from goldmine for like 3 bucks

you could. with alot of fabrication and custom work.

but, lets me realistic for a second.

if you come in here with no real understanding of how a cocker works, i very much doubt your ability to put in a ram designed for the cocker, letalone an industrial ram that wasnt designed for an application that smal.

3way would not beable to supply enough air volume to operate propery, nor would you beable to find barbs small enough for the pnumatic hose to slide on.

the ram shaft is huge, and even if you managed to get the damed thing to work, the amount of mass that would move every time you shot would make the gun shoot worse than a tippman.

[fretmelter]

hmmmmm....well it is 3 bucks. can u tell me anything tht is about the same size to maby get an idea of the size?

[fretmelter]

ooooo cyber thug i know what u meen and y u were so sceptacle yeah i know how a cocker works and for the fittings i was ganna tap new ones but the 3-way probably wouldnt supply enuff air for the volume of tht cylander. well thnx for your help ill go look in BST

[CyberThug]

yeh, BST = cheap rams. get an STO if you are looking for a stock replacment.

or an eclipse/belsales if you want one of the best rams.