I do apologize for the pictures I will need to get my better camera and get a bunch of good pictures and Ill post a video up once I decide what Im going to do about the eye situation because a gun without eyes is just going to be a video of me chopping if im shooting fast.
Ok. I had a halfblock cocker body lying around and some other random parts so I decided instead of making it a pump cocker i was going to do something different and i decided to turn it into a fasor like the legend and the wrath and some other guns that I am probably forgetting about. The gun is different from the wrath and the legend though by a few things the first big thing is that the ram and spring is in its own seperate cylinder which has an incredibly short cycle. the ram was a modified angel lcd ram because they are so numerous and smooth and i happened to have one lying around. I found a spring that fit then I drilled bored out the ram housing a little and cut down the ram shaft a little as well to incorporate for the spring, after that i drilled numerous exhaust holes on the spring side of the ram so it could be ventilated and not trap air in making the gun cycle slower. I then made a custom back cap which is secured on by set screws and has an o-ring to seal it to the ram housing. I put a clippard qev on that to then make it quicker. I decided to use a mac valve for the gun because they are incredibly fast and can handle high pressure (the gun doesnt have an lpr) I milled a slot to fit half the noid in the body and I milled out the trigger frame to fit the rest of it in without needing any trays that would make the gun taller. I used a dm5 frame I had kicking around with an all so sweet critical trigger. I managed to squeeze a lucky wrath board in the dm frame to power the mac noid and it has a virtue chip in it and a 25 gram microswitch. the bolt is a nylatron turtle bolt that I got with the body and I took out the feedneck and turned it down on the lathe to accept ego feednecks on it. the front I just plugged off with another screw and I am using a gladiator reg becuase i had one and they are really really nice. that barrel is just there cause its a hot barrel but not intending on using it with this gun. There are no eyes in it yet because I am still considering and trying to find out if a marq board can power the mac noid cause I am thinking about using the 4 eye system to make it even faster. The exposed hoses are a bit of an eye sore but the gun isnt that pretty looking anyway and I couldnt figure out a good way to route the air through the body so I just decided to run the hoses outside and I know I need a longer front hose (it is cut to so its leaking right now).I rigged a dye membrane pad to work with the board but a dead beat friend has my only membrane pad right now so i just got the exposed wires and im doing the ghetto hotwire to turn it on and switch to eyes off.
"Originally posted by Jack Wood: Bollocks, just got Philidelphia cream cheese all over my keyboard."
"Originally posted by Jack Wood: Anyone who likes to punch fat girls in the back of the head when he's nailing them is top class bloke, lol"
"Originally posted by Jack Wood: I want to drink your *** under the table then piss in the flatbed of your truck while your too drunk to move :)"
thanks for the compliments i got to fix that hose and not be lazy and wire some eyes to the board then drill the body for them so i can get a nice fast video with paint. cause as you see in the vid that they ****ty target i had fell down and i think i was shooting hot cause the reballs blew right threw the double garbage bags and hit the fence behind it. it was shooting really really smooth though
__________________
"Originally posted by MangoChutney:
If I wanted to look like a crazy ******* running around with a gun, I'd play Airsoft. "
yes its an open bolt fasor style gun with a spring returned ram like the legend and wrath are. I actually have another idea to make a closed bolt cocker without a front block like this gun but it requires a very complicated ram and hammer system with 2 solenoids but it will do the job very well if ur intersted in pursuing something like this but closed bolt. actually its a pretty good antichop to
im no where near getting it annoed so i will worry about making it look pretty later. ill let it look fugly till it does its job and shoots insanely fast
__________________
"Originally posted by MangoChutney:
If I wanted to look like a crazy ******* running around with a gun, I'd play Airsoft. "
i have shot the gun myself it is very smooth and intensly fast. It is surprisly light and quite. Has a great field of vision b/c of the ego feedneck.The Trigger is a like a sexual expirence no lie. And if u get your finger in the way of the cycling your ****ed. amazing gun that all i have to say. Definetly have to try it for yourself!
That is BAD ***! i might just have to try this with my 04 vert cocker
to you sir!
__________________ She's like heroin
Sipping through a little glass
She wants nothing more
But to be a little whore
He wants nothing less
But to wear a little dress
“If the facts don't fit the theory,change the facts”-Albert Einstein-
i dont mind if its relates to fake cockers maybe ill call it "the focker" or dye focker because of the dye frame. no second thought i might get sued doing that. but its not really a cocker anymore its not really anything anymore. It still needs work but im being very lazy to finish it more ill get eyes in it soon though and tackle making my newtonish valve so it will start cycling faster and still be as buttery smooth as it is. literally the only gun I have owned that shot smoother then this thing is was my old nyx trix which shot like absolute butter with all the lethal parts it had in it. ooo and no i cant ul this unless i use a predlock board which i actually have one in a cocker project right now that im considering scrapping so it could one day be one but i dont really feel comfortable with the skinny grips i like a beefy feeling which is what this gun has because the board is making the grips pop out so much
ps. wednesday ill try and get some nice high quality photos when my good camera comes up to me
__________________
"Originally posted by MangoChutney:
If I wanted to look like a crazy ******* running around with a gun, I'd play Airsoft. "
to you sir!
