[Snowball13]

I can't make a URL link in my sig. Like have it say Dirty Imp Owners Club instead of- http://www.pbnation.com/newreply.php...e=1&p=37090494

[mrxr250rider]

squanch that gun looks 100 percent more beastly with an iframe

[Snowball13]

Look at this annoe. I think it looks pretty sick (maybe in diff. colors though). http://img172.imageshack.us/my.php?i...scn0025qq3.jpg

[BlueImpulse]

Originally Posted by Snowball13

I can't make a URL link in my sig. Like have it say Dirty Imp Owners Club instead of- http://www.pbnation.com/newreply.php...e=1&p=37090494

When you add a hyperlink, there will be an area of the new text highlighted. It should be a repeat of the actually address. You just type what you want, and that's what shows up as the link. That probably didn't make any sense...


Hey Squanch, I just noticed your new frame dude, looks great.

[BlueImpulse]

Got a quick Q for you fellas. I picked up a NDZ ram assembly and I'm wanting to trade out the hammer with a rathole. I've read about boiling your ram for easier removal of the hammer, but what's the best way to get the back cap off without stripping out the hex slot?

I've been working on it but it just doesn't want to give, and if I put on any more pressure it's gonna strip, I just know it. Should I try boilng it as well? Got plenty of spare orings BTW, so that's not a problem. Thanks in advance.

[Squanch]

i dont know much about rust and stuff but i dropped my assembly in a pot of water by mistake when changing the hammer and it was ok so it might be ok to boil it but what if the rubber gets hot and stuck on it?

get an old leather belt and wrap it around the ram housing and then put it in a vice (this is just so you don't scratch it) then carefully try and remove the back cap this might work

but if you want to boil it then try this

i really dont think you should boil the whole assembly just put on oven mits and hold on to the ram housing while you stick the back cap in and keep it there for about 2 min then wrap a belt around it and put it in a vice and try and take it off

once the back cap is off you can boil the hammer to loosen up the loctite then wrap a belt around that and put it in the vice and unscrew the ram from the hammer

when putting your new hammer on use green i think loctite or mabey blue i dont remeber and just screw it on with hand pressure

i hope this made sense

[BlueImpulse]

Yeah, that made sense. Not too worried about rust since the entire assembly minus the hammer and ramshaft is Aluminum. The only thing I'm worried about is as you said, if the rubber gets hot and stuck on it. I've never dealt with a melted oring before, so that would be a new one to me.

I'll try sticking the back cap in some hot water for a couple minutes and see what happens, then do the boiling water/leather belt/vice trick for the hammer.

Blue loctite is the only way to go, Green shouldn't be used for anything that you may want to remove later.

[Snowball13]

I don't think there is green, sorry to burst ya bubble. It's only red and blue. The back cap of mine came off easily. I used a wrench and an allen key.

[white trash]

OK
2 thumbnails for you all to drool over
i hope Nick approves my membership



for now for the porno
a couple of p_ssies

[Snowball13]

lol, welcome Mr. Trash.

[BlueImpulse]

Nice! You should open an Imp Museum

No bubble bursting needed Snowball, haha. Green Loctite #290 is available almost anywhere. It's just not the best bet for paintball markers. I wish that my ram cap would come off easily like yours did, it's just being stubborn I guess

[Snowball13]

Are you holding it with your hand? Or are you putting a wrench on the end?

[Illusion_nick]

well to blue impulse, in the new pic it shows the slot i was talking about
, so im pretty sure its a eclipse actually.(i still may be wrong, but i feel like 99% percent sure its an eclipse now)

trash - on the nice collection of imp. and yes i added your name

[white trash]

Originally Posted by BlueImpulse

Nice! You should open an Imp Museum

yeah, its funny
everytime i'm broke i see a certain couple of imps that come up for sale,
there is a pink rat w/ an OTB annoéd to match, that keeps coming up,i have had that gun bought like 3 times now only to come up short on cash, same w/ a purple strange w/ cert. of authenticy that it was strange used, again short of cash
but this fall that will all change,
told the wife, once the moola starts coming in again and the bills get caught up,
look out e-bay,
í'm going on a spending spree
guns and parts, but unique parts, like jackel frames and dynamix frames
pl bodies and ndz stuff
and some old skool stuff too, like old jerseys and gear bags, masks and maybe older guns too

[Snowball13]

Lucky, I wish I could do that too. Have fun though.

[Illusion_nick]

i would do that, but im pretty much done gun whoring now, but yeah have fun wiht it and GL.

[Squanch]

i would gun whore but part time wendeys is just enough for me to set my gun up and play on the weekends

[Snowball13]

I had 5, sold one, and one doesn't work so I wouldn't consider myself a whore yet.

[Illusion_nick]

i was a gun whore, but no more... it takes to much money, and especially for me, i only have a job reffing at a field and thats weekends only,so it takes to much time and money, and i just dont have either of those anymore., but it was fun.

[BlueImpulse]

Originally Posted by Snowball13

Are you holding it with your hand? Or are you putting a wrench on the end?

No, I'm using a strap wrench to hold the ram, and an 1/8" allen key. I just got home from a funeral so I haven't had a chance to try the hot water method yet. Speaking of "holding it with your hand", that made me think of this dude that can bend an adjustable wrench with his own hands. Sorry if that's a little OT, just came to mind though...I think I saw him on a show on Discovery or TLC.

Originally Posted by Illusion_nick

well to blue impulse, in the new pic it shows the slot i was talking about
, so im pretty sure its a eclipse actually.(i still may be wrong, but i feel like 99% percent sure its an eclipse now)

Yeah, I think the fella I bought it from had it re-annoed so he may have just taken the jewels off and never replaced them. But did the Eclipse Imps come with an LPR standard?

Originally Posted by white trash

yeah, its funny
everytime i'm broke i see a certain couple of imps that come up for sale,
there is a pink rat w/ an OTB annoéd to match, that keeps coming up,i have had that gun bought like 3 times now only to come up short on cash, same w/ a purple strange w/ cert. of authenticy that it was strange used, again short of cash
but this fall that will all change,
told the wife, once the moola starts coming in again and the bills get caught up,
look out e-bay,
í'm going on a spending spree
guns and parts, but unique parts, like jackel frames and dynamix frames
pl bodies and ndz stuff
and some old skool stuff too, like old jerseys and gear bags, masks and maybe older guns too

Haha, I know how you feel. I have a small chunk of change I can spend each month, and once it's gone I'll see all kinds of cool guns and parts come up for grabs. After my Imp is done at Elias, I was planning on picking up an old school cocker pump and an automag.

A team owned Purple Strange? That sounds like a nice find if you can pick it up. It seems that you're one who appreciates the history behind a marker. A true collector.

[GameFace99]

can i get in?