Angel Velocity Problems - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 05-10-2001, 11:17 AM #1
Kahoots
 
 
Join Date: May 2001
 has been a member for 10 years
Red face

Hey guys i have Been have velocity problems. I checked my lpr and thats fine. I even turned up my dwell a little but i cant seem to get my velocity up past 260. My skrew in my reg seems to be very loose and i have it almost all the way out and the velocity hasnt changed. I also tried skrewing my skrew all the way in and starting over. I didnt have any luck wiht that eather. So I think i narrowed it down to the Reg.. Does any one have any suggestions to what i could do?
Kahoots is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 05-10-2001, 03:42 PM #2
DarkRipper
Elite
 
DarkRipper's Avatar
 
Join Date: Apr 2001
Location: VA
Annual Supporting Member
DarkRipper is a founding member
DarkRipper is BST Legit
DarkRipper donated to help Peyton Trent
DarkRipper owns a Planet Eclipse Lv1
DarkRipper is Boss
Do you have an LCD? If so, borrow another regulator and see if that fixes the problem. If so, you may need to take your reg apart and clean it up a little. If the screw is damaged somehow, you may need to get another reg. Warped sells them.

Try that and tell us how it goes.


DR
__________________
My old feedback
My new feedback

old school PBC admin... keeping it real


Please read and rate my reviews! =) ---> Here!

Buy my sweet red Eflex before the kittens kill again :(
DarkRipper is offline  
Old 05-10-2001, 11:59 PM #3
Kahoots
 
 
Join Date: May 2001
 has been a member for 10 years
Velocity

I have a led.. should i try the same thing i was going to take my reg apart but i dont know anything about them.. so suggestions or a diagram would help.. Also my velocity skrew seem very loose even when its gased up.. would just teflon fix it?? I talked to another person and they suggested snap ring? could that be it?? thanks for helping me out guys

Noah
Team Kahoots A
Kahoots is offline  
Old 05-11-2001, 12:39 AM #4
timebomb
RAZALIFE.COM
 
timebomb's Avatar
 
Join Date: Feb 2001
Location: San Diego, CA
timebomb is a Supporting Member
timebomb is a founding member
 has been a member for 10 years
timebomb works for a Paintball manufacturer
timebomb donated to help Peyton Trent
http://gimmewar.hypermart.net/angel%...cs/minireg.gif

You'll need to remove the C-Clip first, you use a CirClip pliers to remove it. Once you do that everything will just fall out of hte reg (might need to slam it on a table to get it out). From there clean it all up very thouroughly and put everything back into the reg as the diagram shows.

Mike

PS make sure the spring pack is in there correctly.
__________________
timebomb is offline  
Old 05-11-2001, 10:34 AM #5
Kahoots
 
 
Join Date: May 2001
 has been a member for 10 years
Talking Kool

Ok i have cleaned it out and did what u said to.. SHould i oil anything?? Also i just put teflon on the velocity skrew it that ok.. That dam grub skrew wouldnt come out.. is that a problem??

Thanks
Noah Kahoots A
Kahoots is offline  
 




Posting Rules
Forum Jump