[Hitmantality]

Hi this sounds really dumb but I am horrible at math, but my gun had a small leak in the noid, but i reversed the concave of the spool to face side B on solenoid, and now my gun shoots fine slow, but when i walk the trigger the balls start shooting like 5 feet, i wanted to know how to set dwell.... I know how to enter setup and stuff, I just dont know how change settings??? Do i pull the trigger for a click uup one or something????

Please help me

[sflusch]

It sounds like the solenoid isn't your problem... make sure your regs are assembled correctly, esp. the lpr (look for the springs to be in the correct order). Also check your asa to make sure it's screwed in all the way.

The problem is going to be in your recharge somewhere along the line, probably not the solenoid.

[Hitmantality]

You think its alright to put the concave of the spool facing B, instead of A?

[ebolacola]

consult the manual to learn how the solenoid is properly assembled.

lube your regs, and reset the dwell to stock.