Near completed Pump Spyder - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 05-26-2007, 07:37 PM #1
nenkitsune
 
 
nenkitsune's Avatar
 
Join Date: Aug 2006
Location: Phoenix, Arizona
Near completed Pump Spyder

Well, i finally got my parts, and today i made the pump arm for it. It's a victor 2 with a modded v/a, ndz valve, jbwelded pin (i need to redo it, i shaved off to much jbweld) a stock bolt, and a modified hammer. it runs on a 3.5 catalina tank. I made a crappy video, but i think it's ok. a bit small, but it shows the important bits











and now for my crappy video. when i said it recocks after each shot, i ment to say, you recock after each shot. i know it's crappy, i used a camera to take the video. it's my dad's and i dunno how to change the video quality. i'll use a real video camera when i get everything fixed. that won't be for a few weeks though, since i'm moving to arizona on thursday

http://smg.photobucket.com/albums/v2...t=MOV02895.flv
__________________
"Originally posted by texastornado: ...i was playin with my buddy once and he told me he couldn't cock his acs which had come uncocked. It turns out his arm had fallen off..."

Spyder E-99 Avant (out of commission/spimmifying)
Kingman EM-1: Kapp Bushmaster V/A, Bumper mod, Modded stock bolt, Tboarded (ver a), WGP Ergo reg

My Feedback
nenkitsune is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 05-26-2007, 08:15 PM #2
pacasowithagun
SMASH! Now clean it up!!
 
pacasowithagun's Avatar
 
Join Date: Jan 2006
Location: 410/Kiladelphia
pacasowithagun owns a Planet Eclipse Ego
pacasowithagun is an NCPA National Champion
you should try and put a spring inbetween the pump handle and the body so you can replace the ghettoness of the rubber bands.
pacasowithagun is offline  
Old 05-26-2007, 08:18 PM #3
gamer565
*****es love cannons!
 
gamer565's Avatar
 
Join Date: Dec 2005
Location: OK
Annual Supporting Member
gamer565 is playing at Living Legends VI
gamer565 is playing at Living Legends VII
gamer565 posts videos on PbNation
gamer565 is reppin' sidebar 4 life
gamer565 has achieved Level 6 in PbNation Pursuit
gamer565 is one of the top 100 posters on PbNation
gamer565 is Boss
i finished mine yesterday, ill try to get pics of later tonight
__________________
Jolly Green (╯□)╯︵ ┻━┻

gamer565 is offline  
Old 05-26-2007, 08:25 PM #4
nenkitsune
 
 
nenkitsune's Avatar
 
Join Date: Aug 2006
Location: Phoenix, Arizona
Quote:
Originally Posted by pacasowithagun View Post
you should try and put a spring inbetween the pump handle and the body so you can replace the ghettoness of the rubber bands.
i can't really do that because of the way the pump arm is made. i can use a normal velocity adjuster that covers both tubes, and put a spring in that to push the bolt forwards.

edit. meh, the sping behind the bolt doesn't work that great
__________________
"Originally posted by texastornado: ...i was playin with my buddy once and he told me he couldn't cock his acs which had come uncocked. It turns out his arm had fallen off..."

Spyder E-99 Avant (out of commission/spimmifying)
Kingman EM-1: Kapp Bushmaster V/A, Bumper mod, Modded stock bolt, Tboarded (ver a), WGP Ergo reg

My Feedback

Last edited by nenkitsune : 05-26-2007 at 08:37 PM.
nenkitsune is offline  
Old 05-26-2007, 08:44 PM #5
Codymm1014
Its MY CUP
 
Codymm1014's Avatar
 
Join Date: Dec 2006
Location: Cactus
You guys we definitely need to make a spyder pump thread for anyone whos made one. Im near finished with mine. Im trying to make mine really nice though so mine might take a while longer.
__________________
YA GETS NONE
Codymm1014 is offline  
Old 05-26-2007, 08:52 PM #6
nenkitsune
 
 
nenkitsune's Avatar
 
Join Date: Aug 2006
Location: Phoenix, Arizona
haha, mine would be really nice, but i wanted to test out the strength of the pvc and the way i wanted to hook it up to the bolt. once i move out to AZ i'll probably make a few more pump arms to get it perfect. i might just end up not having a return for the pump arm. it's not really needed
__________________
"Originally posted by texastornado: ...i was playin with my buddy once and he told me he couldn't cock his acs which had come uncocked. It turns out his arm had fallen off..."

Spyder E-99 Avant (out of commission/spimmifying)
Kingman EM-1: Kapp Bushmaster V/A, Bumper mod, Modded stock bolt, Tboarded (ver a), WGP Ergo reg

My Feedback
nenkitsune is offline  
Old 05-26-2007, 09:03 PM #7
Codymm1014
Its MY CUP
 
Codymm1014's Avatar
 
Join Date: Dec 2006
Location: Cactus
Yea, Im working on mine right now. Im making a wood pump grip with hitman mod, wood grips, stock class feed tube, and a wood stock for it. Then Im powder coating the body black. But I need a frame. not enough money.if someone has one theyd like to donate or maybe sell thatd be cool too.
__________________
YA GETS NONE
Codymm1014 is offline  
Old 05-26-2007, 09:11 PM #8
nenkitsune
 
 
nenkitsune's Avatar
 
Join Date: Aug 2006
Location: Phoenix, Arizona
lol yeah, i'm usin the only frame i have atm.
i could make a wood grip for it, but plastic is easier. i might make it thicker by adding a peice of pvc i have laying around. i can't really hitman mod it because of how long the rod would have to be (since it's ove the barrel, not under) Once i move i'm going to make a nicer pump for it, and buy a phantom stock class feed for it. i'm thinking about not using detents at all, but i think next time instead of eyeballing it, i'll actually measure and draw out where i need to cut.
__________________
"Originally posted by texastornado: ...i was playin with my buddy once and he told me he couldn't cock his acs which had come uncocked. It turns out his arm had fallen off..."

Spyder E-99 Avant (out of commission/spimmifying)
Kingman EM-1: Kapp Bushmaster V/A, Bumper mod, Modded stock bolt, Tboarded (ver a), WGP Ergo reg

My Feedback
nenkitsune is offline  
Old 05-26-2007, 10:06 PM #9
gamer565
*****es love cannons!
 
gamer565's Avatar
 
Join Date: Dec 2005
Location: OK
Annual Supporting Member
gamer565 is playing at Living Legends VI
gamer565 is playing at Living Legends VII
gamer565 posts videos on PbNation
gamer565 is reppin' sidebar 4 life
gamer565 has achieved Level 6 in PbNation Pursuit
gamer565 is one of the top 100 posters on PbNation
gamer565 is Boss
i think that mine could be the most ghettoest pump ever. ill get pics up soon so u all can see
__________________
Jolly Green (╯□)╯︵ ┻━┻

gamer565 is offline  
Old 05-26-2007, 10:14 PM #10
Codymm1014
Its MY CUP
 
Codymm1014's Avatar
 
Join Date: Dec 2006
Location: Cactus
Once I finsih mine I'm making a spyder pump group. also, does neone know the best way to "paint my gun" from home. I know I cant do anno'ing or powdercoating, but does anyone know any good options?Doesnt need to look good, just needs to hold up.
__________________
YA GETS NONE
Codymm1014 is offline  
Old 05-26-2007, 11:09 PM #11
nenkitsune
 
 
nenkitsune's Avatar
 
Join Date: Aug 2006
Location: Phoenix, Arizona
i would say Krylon spraypaint, and an oven. put a thin coat of paint, then bake it in the oven (not sure the temp, prob around 175ish?) then repeat the process
__________________
"Originally posted by texastornado: ...i was playin with my buddy once and he told me he couldn't cock his acs which had come uncocked. It turns out his arm had fallen off..."

Spyder E-99 Avant (out of commission/spimmifying)
Kingman EM-1: Kapp Bushmaster V/A, Bumper mod, Modded stock bolt, Tboarded (ver a), WGP Ergo reg

My Feedback
nenkitsune is offline  
Old 05-26-2007, 11:16 PM #12
gamer565
*****es love cannons!
 
gamer565's Avatar
 
Join Date: Dec 2005
Location: OK
Annual Supporting Member
gamer565 is playing at Living Legends VI
gamer565 is playing at Living Legends VII
gamer565 posts videos on PbNation
gamer565 is reppin' sidebar 4 life
gamer565 has achieved Level 6 in PbNation Pursuit
gamer565 is one of the top 100 posters on PbNation
gamer565 is Boss
can you take ur hammer out and post a pic i wanna compare how u did urs to mine
__________________
Jolly Green (╯□)╯︵ ┻━┻

gamer565 is offline  
Old 05-26-2007, 11:21 PM #13
nenkitsune
 
 
nenkitsune's Avatar
 
Join Date: Aug 2006
Location: Phoenix, Arizona
lol lucky for you i already took a pic a while back.



it's not pretty in that picture, because it was before i had polished it back to a nice shine
__________________
"Originally posted by texastornado: ...i was playin with my buddy once and he told me he couldn't cock his acs which had come uncocked. It turns out his arm had fallen off..."

Spyder E-99 Avant (out of commission/spimmifying)
Kingman EM-1: Kapp Bushmaster V/A, Bumper mod, Modded stock bolt, Tboarded (ver a), WGP Ergo reg

My Feedback
nenkitsune is offline  
Old 05-26-2007, 11:29 PM #14
gamer565
*****es love cannons!
 
gamer565's Avatar
 
Join Date: Dec 2005
Location: OK
Annual Supporting Member
gamer565 is playing at Living Legends VI
gamer565 is playing at Living Legends VII
gamer565 posts videos on PbNation
gamer565 is reppin' sidebar 4 life
gamer565 has achieved Level 6 in PbNation Pursuit
gamer565 is one of the top 100 posters on PbNation
gamer565 is Boss
ya i was going to do that then i decided not to because i couldnt find and bits for the dremel that would cut into it

but i do like ur handle better then my axe can handle
__________________
Jolly Green (╯□)╯︵ ┻━┻

gamer565 is offline  
Old 05-26-2007, 11:30 PM #15
nenkitsune
 
 
nenkitsune's Avatar
 
Join Date: Aug 2006
Location: Phoenix, Arizona
Quote:
Originally Posted by gamer565 View Post
ya i was going to do that then i decided not to because i couldnt find and bits for the dremel that would cut into it

but i do like ur handle better then my axe can handle
the metal cutting disk (black ones) and the small carbide bit is what i used
__________________
"Originally posted by texastornado: ...i was playin with my buddy once and he told me he couldn't cock his acs which had come uncocked. It turns out his arm had fallen off..."

Spyder E-99 Avant (out of commission/spimmifying)
Kingman EM-1: Kapp Bushmaster V/A, Bumper mod, Modded stock bolt, Tboarded (ver a), WGP Ergo reg

My Feedback
nenkitsune is offline  
Old 05-26-2007, 11:34 PM #16
gamer565
*****es love cannons!
 
gamer565's Avatar
 
Join Date: Dec 2005
Location: OK
Annual Supporting Member
gamer565 is playing at Living Legends VI
gamer565 is playing at Living Legends VII
gamer565 posts videos on PbNation
gamer565 is reppin' sidebar 4 life
gamer565 has achieved Level 6 in PbNation Pursuit
gamer565 is one of the top 100 posters on PbNation
gamer565 is Boss
mine must have been crap then, because i broke like 2 cutting disk
__________________
Jolly Green (╯□)╯︵ ┻━┻

gamer565 is offline  
Old 05-26-2007, 11:35 PM #17
nenkitsune
 
 
nenkitsune's Avatar
 
Join Date: Aug 2006
Location: Phoenix, Arizona
Quote:
Originally Posted by gamer565 View Post
mine must have been crap then, because i broke like 2 cutting disk
where they brown? if they were, those are aluminum oxide disks, and aren't even worth piss to use on plastic

This forum requires that you wait 45 seconds between posts. Please try again in 5 seconds.
__________________
"Originally posted by texastornado: ...i was playin with my buddy once and he told me he couldn't cock his acs which had come uncocked. It turns out his arm had fallen off..."

Spyder E-99 Avant (out of commission/spimmifying)
Kingman EM-1: Kapp Bushmaster V/A, Bumper mod, Modded stock bolt, Tboarded (ver a), WGP Ergo reg

My Feedback
nenkitsune is offline  
Old 05-26-2007, 11:42 PM #18
gamer565
*****es love cannons!
 
gamer565's Avatar
 
Join Date: Dec 2005
Location: OK
Annual Supporting Member
gamer565 is playing at Living Legends VI
gamer565 is playing at Living Legends VII
gamer565 posts videos on PbNation
gamer565 is reppin' sidebar 4 life
gamer565 has achieved Level 6 in PbNation Pursuit
gamer565 is one of the top 100 posters on PbNation
gamer565 is Boss
well i just went and looked and i was using brown disk, looks like a trip to lowes for me tomorrow then lol


also was size of pvc pipe is that?
__________________
Jolly Green (╯□)╯︵ ┻━┻


Last edited by gamer565 : 05-26-2007 at 11:47 PM.
gamer565 is offline  
Old 05-26-2007, 11:47 PM #19
nenkitsune
 
 
nenkitsune's Avatar
 
Join Date: Aug 2006
Location: Phoenix, Arizona
Quote:
Originally Posted by gamer565 View Post
well i just went and looked and i was using brown disk, looks like a trip to lowes for me tomorrow then lol
get the EZ-Lock kit. they have one that comes with the mandrel for it (thing to lock the disks into) and 5 metal cutting disks. i think it's 10 bucks
__________________
"Originally posted by texastornado: ...i was playin with my buddy once and he told me he couldn't cock his acs which had come uncocked. It turns out his arm had fallen off..."

Spyder E-99 Avant (out of commission/spimmifying)
Kingman EM-1: Kapp Bushmaster V/A, Bumper mod, Modded stock bolt, Tboarded (ver a), WGP Ergo reg

My Feedback
nenkitsune is offline  
Old 05-26-2007, 11:52 PM #20
NoelyDeezNutz
Rebel against
 
NoelyDeezNutz's Avatar
 
Join Date: Jun 2006
Location: Westchester, NY
NoelyDeezNutz plays in the USPL
NoelyDeezNutz plays in the PSP
NoelyDeezNutz owns a Planet Eclipse Geo
NoelyDeezNutz owns a Planet Eclipse Ego
NoelyDeezNutz is a top reviewer
Quote:
Originally Posted by Codymm1014 View Post
Once I finsih mine I'm making a spyder pump group. also, does neone know the best way to "paint my gun" from home. I know I cant do anno'ing or powdercoating, but does anyone know any good options?Doesnt need to look good, just needs to hold up.
spyders can be ano'd.... and for just the body, it shouldnt be too much money (like 20 bux)
__________________
Killing for the Hungry Fat Chicks
I support: PBChic, Planet Eclipse & Understood
SameBIG CHIEF - I've met plenty of tools who own a Luxe. Looks like they failed on the tool less aspect.
NoelyDeezNutz is offline  
Old 05-26-2007, 11:56 PM #21
Codymm1014
Its MY CUP
 
Codymm1014's Avatar
 
Join Date: Dec 2006
Location: Cactus
I know they can be anno'd, i just didnt know how muc hit would cost. ill look into it.
__________________
YA GETS NONE
Codymm1014 is offline  
 




Posting Rules
Forum Jump