Originally Posted by xego71124x
i just lubed my rammer and lpr and when i put it back together it started to leak from the selionid rammer area and it is a heavy leak i am not sure what it is all the orings and seals are good and it has been freshly lubed with the factory lube any ideas please help
Because the solenoid is over pressurized. You not supposed to remove the LPR body, if it is not necessary. The 2 14X2 o-rings are damaged on the LPR body, therefore the high pressure air and the low pressure air is mixing and the solenoid gets over pressurized. You will have to change the LPR body o-rings. You must have some in the small o-ring bag which was provided with the marker.