[Crosby]

ok i got a tac 8 and when i air it up it shoots fine for the first 8 shots then after i reload the clip and put it back in for another 8 (same co2) the trigger starts to stick and it will only fire ocasionaly but like if i pull the trigger couple times it will finaly shoot again BUT then it sticks for another 2-3 pulls before it fires again.

looking for alittle help on what might be wrong

[Destroyer 105]

How fast are you firning it? If you fire quite fast with CO2 and its cold out it might stick but that happens to most guns. Try firing it somewhere warmer or try anthother CO2 or re lube the bolt.

[PBEric]

I would also make sure that the marker is well oiled, especially the o-ring inside the lip of the powertube.

[Long Shot]

if the trigger is sticking focus your attention on the sears, releases, and pins. these are the things that really need to be oiled (steel on steel dont work too good). the reason the trigger is most likely sticking is that the sear has no oil on it and the force being applied to it by the bolt has caused it to lock up and require too much effort to pull. take apart the marker and then the trigger firing assembly and re/oil each component. when you reassemble the firing mechanism put a little more oil on top of the sear and other parts so they release smoothly. let me know if this solves your problems.