EGO 06 Leak please help!

I_Like_Nuts · 04-26-2007, 12:42 AM

I just got my ego and i accidentally changed my dwell while it was gased up and took a shot and now there is a small leak coming from somewhere around the noid. How do i fix this???? Please tell me i don't need to buy a new noid

I_Like_Nuts · 04-26-2007, 01:25 AM

anyone plz help??

garticus · 04-26-2007, 03:20 AM

What's the dwell @ currently? (should be between 8 - 10ms)

Is your LPR flush? (or the max 1 turn in...but flush is good)

You might need to oil and\or replace the rammer o-rings.

Also make sure your HPR is not set to high....(clockwise to lower pressure)

Bill · 04-26-2007, 05:35 AM

Pin point the leak so we can help you better. Could be a dozen things!

Take the noid apart and check for debris. Use very very little grease on teh spool and reassemble.
Change the back #11 rammer oring.