[ProudTippmannOwner]

got this vid..


----------------------------------------------------------------------
OR
----------------------------------------------------------------------

http://s30.photobucket.com/albums/c3...ent=cocker.flv

---------------------------------------------------------------------

once i get above 5 bps it does this and sometimes it i guess it uncocks and do what it does in the beginning of the vid.
This is my first e2 systemx/cocker and idk whats up?
please help

[magman687]

i cant see the vid bcus im on dail up but check your lpr it might need turned up.

or have you treid that?

[Kaiman]

Hi Magman, Good to see you on the thread as well. It's Kai from S.A.

To Tippman owner. I think I know whats going on with your marker. I had the same problem. You sear etc. is just out of timing.

I had a look at the vid. What you need to do is set the sear release to release earlier. You marker engages the RAM rod before the sear actually releases the hammer. You need to take out the bolt and stick in a allen wrench at the top of the hole behind the feedneck until you can adjust the sear release. about half a turn or more might fix that problem. Remember you need to turn it out so that the sear catch moves up to release earlier.

You need to increase your input pressure on the inline REG....yours looks like a CP reg. To about 300 then back out your Front reg completely.
Fire a shot and see what it does. Then slowly increase your front regs pressure until it cocks every time. Then give it another turn just for incase.
Also try resetting your Solinoid by pressing the button at the bottom. This will force the marker to cock. it seems like there is debree or something stuck in the pneumatics piping. Becuase it is not getting enough air through to cock the marker. And your front reg looks to be in completely already.

Also back out your main spring all the way. You can fiddle with the velocity once the recocking has been sorted.

Let me know what happens.

[ProudTippmannOwner]

prob solved... i got this e2 used and the settings were off and i didnt no how to get into them so i looked them up online and found that it was inside the grip and then i set it to factory FAST and it rips now.

[Kaiman]

That would explain why your cocker was recocking before it shot.

I actually thought you did the reset and it still kept doing this.

Go figure.

[loser555]

yeah one of your settings was holding the bolt open for longer than it needs to be