DO AT OWN RISK!!!
so before you do anything you need a FUSION
First off i am going to show you guys how to take apart, clean and lube the RAM
If you havnt done so yet, take off your barrel tank and hopper.
first remove the bolt and set it aside in a safe place
hold the gun back and turn the ram cap 1/4 turn so it unlocks
pull it out (while holding the gun back) and let the ram cap, hammer, and spring all come out in one piece
then you clean it
use a rag, shop towel, and paper towel, or if your really cheap your socks
*sorry for the bad quality*
then you proceed to relube the ram with either dow33 slick honey, or whatever lube excites you.
all lubed up
then put it back into the gun..
then go shoot people,
or fantasize over your gun like some people...
If i missed anything about the ram, feel free to pm me are post in here and i will add it on, remember this walkthrough is for you guys, so it should have everything you need
*will do the rest when adam gets here*
stolen from FO from whatisjuice
Thanks pm me if you would like me to remove it.
DO AT OWN RISK!!