More problems - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 04-15-2007, 06:25 PM #1
FDS. (Banned)
yes im a kool kid
 
Join Date: Mar 2007
Location: Monterey CA 831
Unhappy More problems

Well today i was at the field and had some more problems with my fusion.

There were no leaks, so i thought it was going to be a good day, but the problems started at the chrono . Like i said no leaks that i can hear and i get to the fusion turn the lpre down .25 turns (was at 2.25 turns from bottom) and it shooting like 200 the opr is set to 250 psi and the lpr is set to 2 turns from the bottom...

So my first though was, "oh i should go to change the battery spend $9 dollars for 3 batteries and go to the chrono again now its at like 190-200...

I set the opr to 275 and get it up to 245 (the lpr is at 2 turns out still) i turn it 1/4 of a turn still 245 then i turn it another 1/4 turn and its at like 250. I say screw it go off to play.

Shoot shoot kill wipe...

third game off the break turn around start firing the fusion chops every single ball and, the balls are barrley making it over the bunker, go clean eyes/breach/barrel/bolt go chrono it again becuse it wasn't going that fast...

its at like 150 fps

I go to get my stock reg bottom out both regs set the stock reg to 250 and turn my lpr 1-1.5 turns out...

The balls would barrely get out of the barrel set it 2 about 2 turns going about 130 fps...

and the recharge is like 4 seconds, yes it took a couple seconds to wait for the gun to recharge shoot one its at 150 wait a couple seconds its at 150...

I go clean off the ram and put a dab of lube on the one oring and tried it with my cp reg *see below*

i go get my cp back bottom out both regs this time i set the cp to 250 as usual but dont set the lpr i slowly turn it out and still it wont get anywhere near 270, the feild limit, at one point it was going so slow the chrono wouldn't even read it

Now im mad...

Ive tried everything possiable to get this thing shooting, once again i can not hear any leaks coming from teh noid/anywhere

so one last try

i turn the opr to 300 psi, the lpr about 2.5 turns out. Went and chronoed it and still 200...


I just go put the fusion away after that...

I plan to just send it back to DP and see what they can do

I turned out jacking my brothers rental and went and played, i wasted 2 bags of pb balls (1000 rounds) trying to get this gun up and running...


So what i did:

replaced batterys
re-lubed ram
changed regs
put the pressure so it should be at far above 270 fps (please note that i did this as a last resort )
my air tanks was filled to 3000 psi and was screwed in all the way.

I plan on righting DP this email also when i get the time, any suggestions

Thanks
FDS. is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 04-15-2007, 06:31 PM #2
xYodax
TopGun
 
xYodax's Avatar
 
Join Date: Jul 2006
xYodax plays in the PSP
xYodax helped look for balloons

hopefully dp wil replace it. I am sure they will.
__________________
TopGun

Just Enough Fela
xYodax is offline  
Old 04-15-2007, 06:33 PM #3
Bushwood Bill
 
 
Bushwood Bill's Avatar
 
Join Date: Jun 2004
Location: Kentucky
 has been a member for 10 years
I think you and Fusion's don't mix. Try taking your lpr apart and lubing it. If that doesn't work then talk to DP since you already tried everything else.
__________________
Bushwood Bill is online now  
Old 04-15-2007, 06:42 PM #4
FDS. (Banned)
yes im a kool kid
 
Join Date: Mar 2007
Location: Monterey CA 831
Quote:
Originally Posted by Bushwood Bill View Post
I think you and Fusion's don't mix. Try taking your lpr apart and lubing it. If that doesn't work then talk to DP since you already tried everything else.
that is the exact thing my mom just said 2 seconds ago

ive tried everthing and still nothing i just aired it up and beside a small leak coming from my macro line i just had the lpr at 2 turns out opr at 250 and nothing it was like it was shooting with the lpr at 1/2 a turn



ill lube the lpr
FDS. is offline  
Old 04-15-2007, 06:52 PM #5
FDS. (Banned)
yes im a kool kid
 
Join Date: Mar 2007
Location: Monterey CA 831
no dice with the lpr

im pretty sure its the noid

*sigh*
FDS. is offline  
Old 04-15-2007, 07:02 PM #6
FDS. (Banned)
yes im a kool kid
 
Join Date: Mar 2007
Location: Monterey CA 831
and i doubt they would replace the whole gun (they already did twice...) but still im baffeled what the problem could be ???
FDS. is offline  
Old 04-15-2007, 07:12 PM #7
IntenseImage
Death Dealer
 
IntenseImage's Avatar
 
Join Date: Jan 2005
Location: Northampton, PA
IntenseImage is playing at Living Legends III
Today wasnt the best day for me either ... was breakin paint ALL day long. Dunno if it was just bad paint or what but the Fusion was a blender today.
__________________
IntenseImage is offline  
Old 04-15-2007, 07:14 PM #8
FDS. (Banned)
yes im a kool kid
 
Join Date: Mar 2007
Location: Monterey CA 831
oh yea and i tried 2 different paints (stingers/super swirls) and it didn't really help...

Last edited by FDS. : 04-15-2007 at 07:17 PM.
FDS. is offline  
Old 04-15-2007, 07:18 PM #9
VillageTech (Banned)
 
 
Join Date: Apr 2007
amke sure thhat there are no macroline issues, happened to me.
VillageTech is offline  
Old 04-15-2007, 07:22 PM #10
FDS. (Banned)
yes im a kool kid
 
Join Date: Mar 2007
Location: Monterey CA 831
there is a small leak in the macro line, but ive played like that many of times with no velocity problems.

I adjusted the macro 2 times, wasn't sure if it was causing air restiction, and nothing worked
FDS. is offline  
Old 04-15-2007, 07:50 PM #11
SPyDiE01
I do Graphics...
 
SPyDiE01's Avatar
 
Join Date: Dec 2005
Location: Detroit, Michigan
SPyDiE01 supports Cereal Killerz 2
SPyDiE01 is playing at Living Legends III
SPyDiE01 owns a Planet Eclipse Etek
SPyDiE01 supports Team VICIOUS
i wonder if i should get a fusion, or stick with my ion now :-/
__________________
Old Trust +14 -0

Detroit Overkill
SPyDiE01 is offline  
Old 04-15-2007, 07:51 PM #12
FDS. (Banned)
yes im a kool kid
 
Join Date: Mar 2007
Location: Monterey CA 831
dude get a fusion, just because mine dosn't works dosnt mean yours will...
FDS. is offline  
Old 04-15-2007, 07:55 PM #13
FDS. (Banned)
yes im a kool kid
 
Join Date: Mar 2007
Location: Monterey CA 831
and another thing,

i just took off my frame to make 100% sure my fusion wasn't leaking from anywhere (i fixed the macro) and nothing leaked...
FDS. is offline  
Old 04-15-2007, 07:56 PM #14
xYodax
TopGun
 
xYodax's Avatar
 
Join Date: Jul 2006
xYodax plays in the PSP
xYodax helped look for balloons
Why did you post here?
You are one of the all knowing fusion people and I doubt there is anything we know that you didn't do.
__________________
TopGun

Just Enough Fela
xYodax is offline  
Old 04-15-2007, 07:58 PM #15
FDS. (Banned)
yes im a kool kid
 
Join Date: Mar 2007
Location: Monterey CA 831
ill make a vid of it
FDS. is offline  
Old 04-15-2007, 08:03 PM #16
YouGotOwned
 
 
YouGotOwned's Avatar
 
Join Date: Nov 2004
sometimes good people need help too.

Don't worry FDS, once I traveled to this field 1.5 hours away, only to find out my PM6(before I traded it for the shocker I have now) or Fusion didn't work. Ended up wasting a whole case at chrono. When I fixed my Fusion, I had only a few pods from weeks ago. Went out to the field, and my trigger spring fell out. lol. Good thing is that the shop found out that my PM6 had sharp edges in the breech and fixed that for good. But that was towards the end of the day when everyone left. lol.

FDS, you and I have one of a kind Fusions.
YouGotOwned is offline  
Old 04-15-2007, 08:08 PM #17
jdiby17 (Banned)
 
 
jdiby17's Avatar
 
Join Date: Oct 2006
FDS you have had alot of problems iwth your fusion... i gave up on mine and got a freestyle
jdiby17 is offline  
Old 04-15-2007, 08:08 PM #18
josh_did_what
I like sushi.
 
josh_did_what's Avatar
 
Join Date: Apr 2007
sucks for you guys, like i said before, buying local ftw, free lifetime repairs--for life!

and the tech is a genious
josh_did_what is offline  
Old 04-15-2007, 08:11 PM #19
FDS. (Banned)
yes im a kool kid
 
Join Date: Mar 2007
Location: Monterey CA 831
meh ill try and lube teh cp and see what happens...
FDS. is offline  
Old 04-15-2007, 08:19 PM #20
po0ptruck #2
LEMONJELLO FTW
 
po0ptruck #2's Avatar
 
Join Date: Feb 2007
Location: sioux'erland.
did u try throwing it at the wall, or hitting it with a hammer? cuz that could be ur problem
__________________
<><><><><FEEDBACK +1/-0><><><><><NOT A 2K7'er><><><><><><IF YOU PUT THIS IN UR SIG><><><><>
╔══╦╗╔╦══╦╦═══╦═══╗
║╔═╣║║║╔═║║╔═╗║╔═╗║
║╚═╣║║║╚═║║║═║║║═║║
║╔═╣║║║═╗║║║═║║║═║║
║║═║╚╝║═╝║║╚═╝║║═║║
╚╝═╚══╩══╩╩═══╩╝═╚╝
po0ptruck #2 is offline  
Old 04-15-2007, 08:24 PM #21
CASCAN
Teddybear Extraordinaire
 
CASCAN's Avatar
 
Join Date: Nov 2006
Location: TO, Bro
Annual Supporting Member
Do you have the raps? Cause I have the stock asa and I have troubles with it every so often.
__________________
If you don't like my feedback, ask about the -1. I was power-scammed.

Dynasty SFT
CASCAN is offline  
 




Posting Rules
Forum Jump