it s pretty simple , first , take off the sight rail and back plate and grip frame. after , guide the intellifeed wire at the right of the solenoid ( gun facing you ) towards the back of the gun . pass the wire through the hole in the back of the gun and put it in the grip frame . plug the connection in the hopper socket just beside the battery and solenoid on the board .reassemble the gun and un screw your hopper . solder the black wire on the hopper motor ( there are two wires for the power and two for the optic sensor you can take the optic sensor and the hopper board and switch off ( they are useless now ) and re assemble your hopper . Plug the wire in the rail and there you go ...
dont forget to keep an eye on your battery status bars cuz tha angel with intellifeed is energy hog ( in my case ) but woth it ...
PBL paintball supply