r-2000 reg with co2 on a mag? - PbNation
Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Archived Thread - Cannot Edit  
Old 05-08-2001, 04:58 PM #1
GreenAngel's Avatar
Join Date: Apr 2001
Location: Hendersonville/Cookevill
 has been a member for 10 years
Do i need a anti-siphon tube installed on my tank if i use a regulater like the r-2000. I am only going to use co2 with the r-2000 if my nitro decides not to work, or i just need more shots per tank. Will this regulater work good with co2 on a mag, will it make it consistant. Anything has to be an improvment from unregulated co2 on my mag,hehe, like 50fps jumps in vel.
GreenAngel is offline  
Old Sponsored Links Remove Advertisement
Old 05-08-2001, 10:07 PM #2
Nerobro's Avatar
Join Date: Mar 2001
Location: Chicagoland
Nerobro is a Supporting Member
 has been a member for 10 years
there IS a reg in the automag. If you are getting 50 fps jumps in velocity you are most likely feeding the gun liquid co2, or the reg seat is toasty. You need an antishpon tube, but you don't need that regulator. co2, as it is, is bearly at a high enough pressure for adequate preformance on an automag. If you do anything, get someones old ACI expantion chamber and remove the cones from it.. along with the antisiphon tank. Again.. the antisiphon tank is the best thing you can do for your mag on co2. I'll say it again, do not use that regulator, and put the antisiphon tube in the tank. (am I hammering the point in enough?)
You'd have to be Crazy to be sane in this world. - Nero

Omnipotence ain't all it's cracked up to be.......
Nerobro is offline  

Posting Rules
Forum Jump