05 superstock problem, need HELP! - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 04-06-2007, 03:42 PM #1
mofo619
 
 
mofo619's Avatar
 
Join Date: Mar 2007
Location: San Diego
Exclamation 05 superstock problem, need HELP!

the inline reg on my superstock has become loose, but the problem is when i tighten the reg it doesnt line up with the trigger frame. the only way it will line up correctly is if the reg stays loose which causes it to leak. please help!!!
mofo619 is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 04-06-2007, 03:57 PM #2
mht_thomp
...
 
mht_thomp's Avatar
 
Join Date: Nov 2005
Location: Whiteville, TN
mht_thomp is a Supporting Member
yeah... that '05 bm reg always gave me trouble like that too. try replacing the o-ring at the top of the reg. if that doesn't work, look on the side of the reg opposite from the side with the macro fitting/hose input. you'll see an allen key screw. take out your hose/macro fitting, take out that screw, and reverse the two. keep in mind that you'll have to loctite/teflon tape both of them before putting them back in. your air input is now on the opposite side that it was before, possibly letting you screw the reg in further.
mht_thomp is offline  
Old 04-06-2007, 04:02 PM #3
Dr.StraightPride
 
Dr.StraightPride's Avatar
 
Join Date: Jun 2005
Location: san diego
Take the reg off and put a tank oring into the air receiver (where you screw the reg into).
__________________
Dr.StraightPride is offline  
Old 04-06-2007, 04:13 PM #4
mofo619
 
 
mofo619's Avatar
 
Join Date: Mar 2007
Location: San Diego
thanks for the help
mofo619 is offline  
Old 04-06-2007, 06:15 PM #5
mofo619
 
 
mofo619's Avatar
 
Join Date: Mar 2007
Location: San Diego
problem fixed, i replaced the reg o ring with a bigger o ring and now theres no air leak and its lined up correctly.
mofo619 is offline  
 




Posting Rules
Forum Jump